How to fix / solve the 'No resource' error on Hikvision DS-7732NI-E4 NVR

In this video we will show you how to fix/solve the "No resource" error on Hikvision's NVR.

Why does the NVR show NO RESOURCE?
"No resource" refers to the decoding resources of current device are not sufficient to preview the current resolution of all channels, including Single screen and Multi-screen.

To fix this problem:

1. Check all the Single Screen preview if it is normal or not. Take note of the names of the camera that shows "NO RESOURCE" so you can easily identify what channel should you adjust the resolution.

2. Now to Fix this issue, just watch the whole video :)

▬▬▬ Contents of this video ▬▬▬

0:00 - Intro
0:38 - "No Resource" means
0:59 - Fixing "No Resource" problem
5:53 - Voila

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Follow us!

-----------------------------------------------------------------

Other Videos you might like:
How to make/crimp an RJ45 Ethernet Patch Cable
How to setup WiFi Smart Plug, works with Amazon Alexa Echo Dot
How to restore / factory reset ACER Aspire 3 [ Complete Tutorial ]
Sakura PA-500UB 500W Public Amplifier | UNBOXING
CCTV Junction Box I How to conceal CCTV Connectors | Drilling | Tips and Tutorials
Installation of Fire Alarm System at Philippine Merchant Marine Academy (PMMA) San Narciso Zambales
ZKTeco LX16 Fingerprint Time Attendance | UNBOXING | Part 1
------------------------------------------------------------------

Thank you so much for watching this video, please don’t forget to Subscribe, Like, Share, give Comment & Suggestions down below. Keep updated and keep watching our videos.

Tags:
Combizz Technologies
CCTV Installation
#NoResourceError
Tips and Tutorials
CCTV Installer in Olongapo, SBMA, Bataan and Zambales
Electronics Store in Olongapo, SBMA, Bataan and Zambales

#Hikvision, CCTV Cameras, IP CCTV, CCTV connectors, PVC Junction Box, IP Camera, CCTV Installation, Combizz Videos, Combizz YTC, Electronics, IT, Information Technology, NVR, DVR, Single Screen, Multi Screen, Sub-stream Parameters, 352x288 Resolution, Bitrate to 512kbps, IP Address, Record, Combizz Technologies,How to fix No Resource error,NO RESOURCE,CCTV Installer in Olongapo,CCTV in Bataan and Zambales,Electronics Store in Olongapo,DS-7732NI-E4 NVR,hikvision supported cameras,hikvision dvr input not supported,hikvision input not supported,no resource on playback,no resource hikvision nvr,no resource hikvision,hikvision support,hikvision resolution not supported,hikvision support reset password,no resources ping,hikvision supported browsers

[christiannielsen]

This music is just PERFECT for this video. I love it! Just what I needed when trying to concentrate solving hardware issues.

[FatJoeFilms]

Thanks for the video, it helped me out.

[Alex-zcds]

this is what i am actually looking for.. i have installed 32 cameras 6 of them showing no resource but when you enlarge the screen you can actually see the view. and its recording too.. the only problem is the live preview

[terrybryant]

Great video but it did not fix my issue. I have 4 cameras 2 of which are working and two showing no resource. I tried setting all 4 to the same nothing changed. I tried putting the two not working to lower resolution and nothing. Several different combinations have resulted in the same outcome. Not sure what to do from here.

[tajamuladil]

Excellent tips and tutorial about how to fix 404 error ... wonderful tips and subscribed my friend 😍👏

[PlusHD]

Thanks, I almost broke the NVR with the hammer because of that issue 😂

[zohaibkhalid]

Hi, bro this one same problem here but when we check 2:2 or 4:4 cameras online view that’s working but when we show all 32 camera on screen then this problem is coming. Can I solve this trick.

[darkosvk]

What if I dont want to lower recording resolution? Do higher NVR models suffer from this issue and if not what values they have better than cheaper ones?

[EnhancedNightmare]

music is annyoing but this solved my problem. 4x 4k streams is completelly needles anyway.

[dandriftfigueroa]

I tried this already and when I’m trying to click a camera with no resource issue, a settings failed pop up message will come out. Is there anything I have to enable in order for me to change the bitrate and resolution of the camera?

[ozkanozkagan]

Hi all. I got annke 4k cctv set with 5mp cameras, and I got x1 hikvision 8mp 4k 60m camera too. But on setting it don't show 8mp, only 4mp for hikvision. How I can make it to go up 8mp?

[eshwinklassen]

Hi. Can you do a video on HIK Vision DVR showing No Video. I am currently experiencing this issue.

[stanceworks]

my line crossing and intrusion use to work, i turned it off because the neighbours cats kept setting it off and now when i want to enable it again it is telling me" Not enough resource for human body analysis engine" why is that? I have the Analytical Acusense and Colorvu camera. Please can you help

[jayess]

Having a mare with my DVR. Have you ever seen a problem with suddenly all the cameras on the DVR Live View just shows "No Permission" for each camera?. Its a VGA monitor directly connected to DVR. If you move the mouse and unlock it...you see all the cameras again. Once you leave in Live View...after 10 mins...blank cameras again all showing "No Permission". Connect via Hikvision app or internet explorer...shows all fine.

[DavidEPacheco]

¿Y la calidad de la grabación también disminuye?

[gazfrc]

I sorry, but this is not a FIX Why would you compramise or sacrifice your Recording Quality/Resolution for sake of your Live View??? The Recorded Video need will be what provides the Evidence when/if needed, Not the Live View!!!! simple Solution to Eliminating the "No Resource" notification:
1. On the Multiple View Screen, Make sure NO cameras are displaying in Main Stream Mode ( should all be Sub-Stream
2. Split the Camera Live View on the Multiple View Screen options. Instead of displaying all 32 Cameras on One Screen, try using 4x4 (16) option & Switch Mode or 5+1 etc

[DMRsNRoses]

LOL so you buy 2 mp camera's and then you downgrade them to 1.3mp. That is not a good solution as the recorder will be more blurry.

[nagendersingh]

Kuchh bhi samajh nahi aa raha hai aage ae jab bhi video banaye clearty ka dhyan rakhe

[ratansingh]

itani tez sound dal rkha hai...bina sound ka hota, ,

[yazaryaz]

This video is not clear ... So it's a waste