FREE AND SIMPLE MOD GET 6 MORE MPH Coleman Mini Bike CT200U EX

My son was not enjoying his Mini Bike as much, complained about it being too slow. So I fixed that problem for FREE. Now he is getting 6 more MPH and he loves it. Thanks to one little simple trick. Hope you guys enjoy the video.

[Deucealive]

That's the way to do it. You're not ruining the throttle assembly and adjustability is still there.

[rgbigdog]

You need to put a small spring on the screw to keep tension on it so it wont move once you set it.

[gr]

Great view I've seen people try to do it and explain from a camera angle 6 ft away

[threemitch]

Great video! Was easy to follow. I did these steps and got the gov removed but now when I’ve got throttle full out it backs itself off then re-engages. Any advice on what could be causing and how to fix?

[geovannihernandez]

I just snipped the tab off so the screw goes over the tab. I was lazy haha I just had to take the air filter element off to get my snips in

[karlschwab]

Bad idea! This engine as build, is designed to run at a maximum RPM of 3600. Running faster than that, can cause the ignition magnet to come off of the flywheel doing irreparable things to the engine! This happened in my case. The glued-on magnet came off of the flywheel and broke the coil and its cast mountings, loose from the engine! Now I am SCREWED!

[twiztid]

All you had to do was bend that down or cut it. You need to do Governor mod with zip tie

[timothykiniris]

Could have just cut off the threads...

[skillchamp]

I just had to buy a new engine for my ct200u i just installed it it tops out at 20 if I remove the Throddle screw will it cause any damage?

[skillchamp]

I’m so confused I did this for my ct200u it goes 25mph not 27

[SalvadorHernandez-togq]

That throttle stop and engine governor are there for a reason! 🤦