MikroTik Dual WAN over 2 Static IP Internet Connections

[secretaryniMayethVlog]

boss salamat sa tutorial noon tingin ko ang hirap ng basic config ng mt ngayon parang gusto kunang ako mismo mag config.salute

[hagridsbeardguy]

Hello!

Brilliant tutorial, thanks.
Please guide me through making "WAN1" primary and "WAN2" secondary.

In my setup, WAN1 is unmetered, and WAN2 is a metered connection which I am using for failover.
I want to modify this configuration to only use WAN2 when WAN1 is down.

Thank you.

[briansayi]

I did this confing and it works well. I can only remote access the MikroTik on WAN1, not on WAN2.
I mean, it is not possible to remotly access the MikroTik on WAN2 with its Public IP address, unless I disable WAN1. In my config, all WAN have Public IP addresses.
How can I remotly access the MikroTik on WAN2 Public IP address without disable WAN1 ?

[miko]

I have a question, if sending is faster, so by uploading one large file to google drive we will do it faster?

[slytxzh]

thanks you bro it's a perfect job

[TheHeLLsSs]

Hi, thanks for this perfect movie, but i have problem how you forward port ?

I have webserver behind this multiwan, do you know how allow my 80 443 TCP port ? Thanks

[robertjallah]

This Woww.
Thank you l love this one it is very effective

[DangerD]

How i can make port forwarding for both wan?

[Zhunri]

tanong lng sir pano yung same ang ISP na x.x.1.1?
pag nag add ako sa Address list same silang x.x.1.0/24 hnd pwedeng same ang name nila pano
yung pag gawa sa mangle accept need ko b gumawa ng dalawang accept rules ?
salamat sir.

[raiffysampaio]

How can i have the two ISP active at the same time? I had two different ISP, each one with public IP and i have a web page that i wan't to be reachable from both IPs at the same time. The problem is that i can't get the two links active at the same time, even with Load Balance, the traffic get divided between the two links, but my domain that i pointed to the two IPs only reache by the active link at the time.

[KuldeepBarodiya]

sir can we speed double on RB75GR3 with same ISP 200mbps + 200MBPS= 400mbps ?

[directtuts]

Sir working po. Pero may idea ka kung pano ma priority si WAN1? Minsan kase si WAN 2 yung nauuna then mataas ang speed. Yung WAN1 ko kase PLDT fiber then yung WAN2 naka postpaid lang. Need ko po ma priority lang si WAN1

[dimzsgx]

hello! hoping there is a configuration on this on version 7

[rizalfatchu]

request untuk forwading ip publik ke ether1. jika ether1 menggunakan astinet dan ether2 menggunakan indihome.. terima kasih

[eloiano]

Maraming Salamat po sa tutorial.... 100% working po. Ask ko lang po kung bakit kaya hindi nagmerge ang Upload? Ok po sya sa Download speed pero sa upload po hindi nagmerge. Salamat po

[Nightwish-mefx]

Sir paano ang quee nito ? naka global ba ang parent nito?

[daydub]

bihira ang ganitong nagsi-share nang walang kapalit :) salamat po

[ferdinandtorres]

boss gagana po ba ito sa parehong ISP na pldt fiber??papano kaya po iyun eh parehas naman po ip nila na 192.168.1.1??maraming salamat po..ganda ng tuts nyo dito sa vlog nyo..kaso naguguluhan ako kung gagana ba xa if ever gawin ko po ito sa parehong ISP at parehong IP addresses..

[DangerDD]

Works fine except maximum speed is 100Mbit/s while both internet connections is 1Gbps... Is there any way to fix that?

[palospalos]

Boss kahit ba isang ISP pero mag Dual Wan okay lang ba?