Getting Started With Creality Print 4

In this video I'll show you how to download and install the latest version of Creality Print. Then we'll move onto downloading a model from the internet, bring it into Creality Print, slice the model, export the GCODE and get it to your printer. @Creality3D

Places to get STL files to print:

[TheFoamWitch]

Thank you so much for this video! I find this whole 3d printing thing so confusing, but you explained it all perfectly and i cant thank you enough! :D

[brickandgear]

Very helpful video. Especially for someone taking their first steps into 3D printing.

[jasonsanders]

Thanks bud you made something that looked hard so easy.

[BlondieHappyGuy]

Thanks for the excellent video.

I just set up my new 3 V3 Plus.

Of course, the first test was the bnechy on the USB key that they provided.
It's already GCode, so not sure of all the settings to produce the most perfect benchy I have ever seen. My old printer is not even close at all. And MUCH slower! This printed the benchy in 14 mins and the quality is amazing.

At the moment, I can't use Cura for this printer as it's Klipper based. Apparently there is a way to tweak Cura into working, but I'll try that later and hope that slicing with Cura will give the same excellent results.

So for now, it's Creality Slicer for me. I was HOPING that it would look enough like Cura to make the learning curve less.

In the video, it is, in that, when you clicked Edit it popped up with the menus to choose everything at a glance, like Cura.

BUT THEIR NEW, CURRENT wow!!! Not so much. It's weird how some companies simply must screw with an already good thing. The interface is not user-friendly now, like the one in this video.

In fact, some of the things I would normally like to change, were difficult to find... but with the help of this video and the work-flow, I was able to find most.

I still need to find FUZZY! That's a MUST HAVE for me!

[benvan]

very informative. i learned a lot off this video. good job Pushing Plastic!

[skyryder]

Good video and I found a function in the software that's going to help me with my printing
Thanks man

Sky

[neilmaccubbin]

Hi Bill. I watched the video where you fixed dimensions in cura using horizontal expansion.It was very informative. I have been using the creality slicer with my Ender 3 V3 SE. I have both slicers but I find Creality is faster. The problem is Creality doesn't have the hole expansion and my holes are .4mm to small. I am printing a lot of functional parts for myself and it is a pain having to test print every connection before I print the part. Is there a setting for it that I am missing ?
Thanks

[kenkok]

Thanks for that, instead of transferring via sd physically, is it possible to plug in the printer (ender 3 v3 se) via the usb c cable and print directly?

[meisterham]

I want to print with PETG on a K1-Max. How do I set the nozzle and bed temperatures for PETG. Also what about the Z-Offset distances.

[jasonroberts]

when you transfer a file why does the pic of the creality not change to the proper pic or give a print time? I noticed in your video yours was 0 min. mine does the same. (just purchased unit) great video as well. I picked up on some errors i was doing and your step by step was great.

[ronnyverminck]

How to connect over USB with Creality Print. I want to try this slicer instead of Cura but it seems it does not connect to the printer.

[abirdseyeview]

how do I change infill from 15% on the VErsion 5.1.4.10249 ( the latest Version for the K1)

[FabianL]

thx man didn't know it had a dropdown menu

[plumberlance]

can you make a video on the Device tab. It would be nice to understand the whole page.

[dirtyburger]

The link you provide for the slicer does not go to the slicer you are using in the video.

[neimander]

My gecode wont save like it says it did but dint i checked hiden and it aint there either idk what to do

[corvusmoonpottery]

Haven't received my Ender-3 v3 se yet (this Tuesday) - but I'm trying to learn as much as I can before it gets here. Thanks for your video Mate!

[AndHrut]

Where can I set the distance of the first layer from the table?

[iancox.gaming]

I cant find it in my downloads it only shows one thing I had download from last week but when I go onto my downloads when the creality print not open it's there ??

[daanverstraeten]

Hey with creality print 5.0 i can't make gcode-file. I can export my project to an stl-file but that's it. I know there is a dropdown where you normally should be able to select another file type but there is none... Anyone any idea?