Beginners Guide to 3D Printing in 2022 - Watch Before You Start

preview_player
Показать описание
This video is a Beginners Guide to 3D Printing were I go over everything from unboxing your first 3D printer to getting perfect quality 3D prints and everything in between.

Products We Use Every Day and Recommend

In Depth 3D Printing Course

Make Money 3D Printing

Learn to Design Using Fusion 360 - Complete and Free Course

00:00​​​ Introduction
00:34 Check Your Printer
02:09​ Materials Introduction
04:47​​ PLA
08:00 PETG
10:44 ABS
14:20​ Idea to Object Process
16:07 Important Slicing Settings
18:00 Support Structures
19:50 Bed Leveling
22:50 Printing
23:00 Summary

My Company

👀 WHO AM I ?!
After graduating from Engineering school I pursued a quick professional football career in the Canadian Football League. I retired from the CFL after just two years to focus on business development and investing. I currently own and operate an engineering design and 3D printing company and a few other businesses that are discussed on this channel !

📱Follow me on instagram @ _austenhartley

Affiliate Disclaimer - Some of the links are affiliate links where I earn a small commission at no extra cost to you.
Рекомендации по теме
Комментарии
Автор

The 3D Printing Course is Complete. I will link it here - it's 100% free (you can use the link, sign up, take the course, cancel membership, you wont get charged). With this link you also have access to my courses on using Fusion 360 (to learn how to design for 3D Printing) and How to Set Up and Etsy Shop (in case you want to sell 3D Prints), again, all free.

AustenHartley
Автор

I was recently offered a new job within my facility as a 3D printer operator. I was going into this with almost zero knowledge. Thank you for this, it gives me a slight foothold on the promotion ❤️

AngelsofDeathAirsoft
Автор

I live in Yazd, IRAN🇮🇷 and it is basically a dry desert. I have been printing with ABS and PLA for like 3 or 4 years now since first time I got interested in 3D printing, I have never used any kind of filament dryer and I never had major problems caused by wet filament like too much stringing. Pros of living in a dry desert city ✌😎

alimohammadmojarad
Автор

Great video! I love that it's straight and to the point without any filler. I just ordered a Prusa Mini last night so now it's time to study up and figure out how to use it! :)

robgoffroad
Автор

I wish I would of found this video before starting my test print >< Thanks so much for taking the time to upload this video. It's been extremely informative and helpful. I've been using a resin printing for 6+ months but FDM feels a bit more complicated and intimidating in comparison...so far. As you said, this should all get easier in time hopefully.

tjomasleal
Автор

I orderd a 3D Printer today, and i'm a total beginner in that field. I will definitly save your video till the printer arrives and refer to it when i set it up. I think your Video is a really good reference point for beginner's =D Keep it up! Getting excited to get my first succesfull print =D

NuclearDesert
Автор

Would love to see you make a show on how to calibrate a printer for accuracy, i.e filament flow, driver steps etc. Having problems with holes lining up and parts fitting together as well as consistancy. I find your shows really clear and easy to understand good job👍😎🇬🇧👏

l.l.coolray
Автор

Thank you for making this video I've been having treble with 3d printing for two weeks now and this video really helped

ade
Автор

Very, very informative video. I've got 3 FDM printers (use only the Creality 3 v2), and 1 Creality SLA printer (had it a year and I'm afraid to use it!!). Thank you for this video, subscribed.

andyb
Автор

So clear! I could listen to you for hours!

uuo
Автор

Dude, amazing video! I have my first 3D printer on my way and this was super helpful.

colinhiers
Автор

I've often found myself stymied by 3D printing way too often. I started out quite a few years back with a simple Monoprice Maker Select V2, and I mostly had issues with corner adhesion. Every time I'd go to level the bed, I could never get it properly leveled either. When I tore the machine apart, I found that its carriage plate was a fairly thin piece of metal that was anything but level. The issues with that printer caused me to stop for a few years, but eventually, I decided that I'd put a bit more money into my next printer(s) to ensure that I got something a bit nicer. (In other words, hopefully with less issues.)

Right now, I've got a Creality CR10S Pro V2 and an FLSUN Super Racer. With the Creality, I keep having issues with the left Z-axis side drooping (likely due to the extruder motor being on that side) causing difficulty in leveling the bed. I'm not entirely sure if that suggests that I need to just tighten the V-rollers a bit or if it just needs to be checked ever so often to ensure proper alignment between the two sides. ...or just convert to direct drive and drop the bowden! 😋 I also think it's disabling the heated bed at some point during printing, which is causing some lifting off the bed. The FLSUN is my newer printer, and I ran into a bit of bad luck there as the LCD's touch functionality refuses to work. Fortunately, I have a Raspberry Pi lying around, so I can just upgrade it to Klipper and ignore the malfunctioning hardware.

Moral of the story? Spending more money won't guarantee a lack of issues!

shinaikouka
Автор

Thanks for putting this very comprehensive content together.

sgMdS
Автор

Very good video. I’m a newbie and this has been very helpful. I liked and subscribed. Thanks for sharing

njcivicwagon
Автор

So glad I found this video, once I get out of the military I too am going to school for mechanical engineering!

HabbaBabbaPanda
Автор

This is THE video I've been searching for.

collincutler
Автор

About PLA on car parts, I'm using PLA a whole time I'm using 3D printer, some cosmetics on car/in car in black or green, in summer on 40°C so I can say these materials on/in car are around 60°C and no melting, still as new, except the color, color is shading away to more white, so from neon green I have white to green-ish :D

impsycheer
Автор

Great video. It is the first video I have seen about 3D printing and I understood very well. Great information. Thank you

martinkrocek
Автор

Great guide, thanks for sharing.
I am really interested in the in depth course!
I ordered a Prusa i3 MK3S+ and i am in the process of learning all the basics and more.

mmpkao
Автор

Thanks found this very informative and will be watching the 3D Printing Course

richard