Trimmer power loss at full throttle

preview_player
Показать описание
Trimmer was working great, but then started to bogged at full throttle. I went through the possibilities and it turn out to be the fuel filter.
Рекомендации по теме
Комментарии
Автор

You saved my life I do repair on strimmers for people and I was losing my mind with an old dynamac strimmer after trying everything and that was the last resort.. it’s running better than a lot of new stuff now thanks I owe you a pint 😂

datfella
Автор

Thank You! This is my first trimmer. It was starving for gas. I did the filter thing and now back to trimming.

eldinwebster
Автор

MrFixit check your fuel line to the carb they get kinked an cut the fuel, fix it by removing fuel line, then remove the shrink wrap and cutting the fuel line shorter so it's more inline with the pickup, the same thing use to happen to my honda gx35, it would bog down an cut out this^^ simple fix solved all my this helps

arronjohnston
Автор

I think I'll try and check that also

green
Автор

Mate u saved me thanks for the video❤❤

lakesiyo
Автор

Thanks, will look into it. I have Honda 4 cycle gx25 that bogs when I rev it up.

musclesmouse
Автор

Thank you I have same trimmer doing same thing and I have tried all same things except the fuel filter ill try that next

darreng
Автор

I have to say I still prefer the two stroke units.

bignasty
Автор

Can you use Carb. Cleaner in the fuel tank, to clean the Carb.. instead of cleaning the carb?

johnreidy
Автор

Mrfixit what was that hooked tool you used to remove the fuel filter with called ?

zaedenuk
Автор

Did you have a part number/ Amazon link for those filters?

kswyg
Автор

I have similar machine and dude I've tried everything except that. Spark plug, spark arrestor, air filter, carb. Just did the clutch too but that was needing to be done anyways.

Driving me nuts. It will start and idle, but the second I push the go button it dies. Worst part is its intermittent, sometimes runs great and other days it won't run at all. I use the thing at least 2x a week so it's like playing Russian roulette. I'm going to change my filter tomorrow.

mr.frzak
Автор

My brush cutter stops while accelerating what is the solution

geniusnocopyrightmusic
Автор

This crazy tried everything watched then decided to clean the filter power was back on like nothing happened and this is my second time watching this video 😭

juniorpeacookup
Автор

Mine goes good for a while then bogs down and dies.

aftrdrk