Continuous and Non - Continuous Load Calculations

preview_player
Показать описание
This video talks about the required calculation for determining the conductor and overcurrent device needed for specific loads as outlined in the 2015 version of the Canadian Electrical Code
Рекомендации по теме
Комментарии
Автор

Thanks so much for posting this one, it helped immensely. There are few posting examples from the CEC, it is not easy to translate back from NEC guidelines.

spelunkerd
Автор

Excellent Video. I learned exactly what I needed to here. Very precise. Good video!

Cypresshtcom
Автор

This was made 6 years ago some numbers changed ? Any plans for a newer one made with the NEC articles

denisek
Автор

thank you Andrew i am willing to challenge master electrician do you have some advice pls

TheHANINE
Автор

Excellent video. Sir i need small clarification. Is it the Circuit breaker itself that you are considering its bi-metallic section as Over current protection device or it is another protection installed after the circuit breaker? CB are normally marked as C40A/10KA meaning o/c tripping at between 5-10 times of 40 A and safe short circuit tripping under 10 KA. bit confused with rule 8-104 {5} first line.

sunilthakur
Автор

what about a tv, it can be on more than 3 hours or it can be on for 15 min too.

noramadrigal
Автор

plz ..
Can you send me this power point?

abdoyassin