Making a connection with Ubiquiti's AirFiber24

preview_player
Показать описание
In this Episode, we are talking about Ubiquiti Network's AirFiber24 wireless point to point links. We will go over the hardware; take a look at a live link and its setting and wrap up with a look at Ubiquiti's link planner.

As always, we hope you enjoy and be sure to subscribe, like, and leave comments below.

*************************
Links:

*************************

See what we are doing on Social Media:

*************************
Intro Music:
Рекомендации по теме
Комментарии
Автор

Hi Guys! Im Senior wireless engineer, and i used this equipment many times in WISP's in brazil. My best link with this equipments was a link of 5.4 km where it was possible to reach 774mb fullduplex for a datacenter client, with this solution of 24ghz. I strongly recommend that the links be in the range of 3 to 4km for an excellent performance and that the maximum EIRP power that the equipment delivers in each case is respected. This is one of the best Backhaul radios on the market, with truly superior performance.

superlinkbrazil
Автор

By using the Airlink planner, with it using Google's maps/earth API, it has access to Google's excellent elevation model, which in most major cities is based on LIDAR data.

cyberentomology
Автор

nice video guys, please keep making video like these (ubiquiti equipments & networking stuff)
thank you

xfinityguyana
Автор

Can this work in the Philippines? We have very poor internet here in the provinces.

reginabeatrizcalero
Автор

Do you have a video of actually installing the Air fiber 24hd and how you line them up

Richard-C
Автор

Could you please recommend an airfiber model that is best in our university. We have a second building still under construction and expected to be finish within 6 months. The distance of the main and second building is about 8km.

jimzongarcia
Автор

Can these be used to make my own private internet service? I'm looking for something around 1000mbps. I thought about buying two of these. Do they stack in data uplink and downlink?

damionmyers
Автор

Thanks guys, nice video. Can you do it for Mimosa B24 as well. It seems like a good alternative to AF24.

mmutlugun
Автор

One quick note about the PoE injector - it's 56V/2A (so that the voltage drop going up the tower gets it to 48V) and most PoE surge arrestors do their thing at 50V, so you're going to want to make sure your surge arrestors go to 75V, or drop 10 bucks on Ubiquiti's surge arrestor which will work.

cyberentomology
Автор

Just watched the video and i think you guys nailed it. Just ordered a pair of airFiber24s and i was planning to use an EIRP of 43 to get a strength of about -39 at a distance of 756m with a clear line of sight. What do you guys think? I am pretty open to suggestions and tips on how to twerk the configs for better throughput and performance

suleimanadams
Автор

Hi, I looking sell internet in my country, could I put this on my tower and then the customer install a litebeam or a Nanobeam with a router inside?

firebigg
Автор

Can we use it for digital cable TV signal transmission

sravanreddy
Автор

What would I need for a single family house for HSI?

carpathian
Автор

You could have just bought the $89 unifi nanobean and saved thousands for just the 300meters.

brandonbarr
Автор

Hi, thanks for your helpful video, I wanted to know how to get access to other side of PTP link without going access device at site, getting access to device from one side?

MTL
Автор

I'm having a problem with 24 devices when it rains. I hope there is a solution to the problem. Note 5U, 5 and X devices work fine when rain falls

aboaltem
Автор

Hi I have a few questions about air fibre
When you buy the an airfibre 24 ( or any of the other models ) do you just need the one receiver for it all to work ?
What is the minimum Mbps you would get if Configured correctly ?
Lastly do you need a license even if your using it for personal use ( not as a business)

xukzALEXx
Автор

I have a link at 5.32 miles at -71 to -73. Unfortunately rain fade is a thing.

GregAspenson
Автор

The v4 interface is much cleaner and just as easy to use. I updated my firmware today.

Kona-Op
Автор

Fast Forward to 13:08 to miss the blah blah typical American talk about nothing to waste time. Get to the point guys!

electechyt
welcome to shbcf.ru