3DPrinting is finally SUPER easy! - Flashforge Adventurer 5M

Super exciting to have these machines not only be affordable but also be SUPER easy to use!

——————————————————————————————
IN THIS VIDEO:
——————————————🔗——————————————

▶️ USE “SAD5” for $20 OFF on a Flashforge Adventurer 5M HERE:

——————————————————————————————
TIMESTAMPS:
——————————————🕥——————————————

0:00 - Teaser
0:33 - Intro
1:50 - CONS
12:40 - PROS
22:37 - Firmware Update
24:32 - Summary
26:05 - WHY HIDE KLIPPER?
28:16 - Outro

——————————————————————————————
DISCORD & PATREON:
——————————————🛟——————————————

——————————————————————————————
# CHANNEL LINKS & DISCOUNTS:
——————————————🛍——————————————

• 5% OFF - Everything from IIIDMAX using code "3DPRINTSOS":
• $10 OFF - Everything from SOVOL using code "3DPRINTSOS":
• 10% OFF - Everything from SUNLU using code "CEFAZKIB0S":
• $20 OFF - MINGDA 3D Printers using link:
• 25% OFF - CALIFORNIA FILAMENT using link:
• 8% OFF - Everything from KINGROON using code "3DSOS":

——————————————————————————————
DISCLAIMER:
——————————————⚖️——————————————

Some of the links above are Amazon Affiliate Links. They do NOT cost you anything but using them and making a purchase helps the channel a tiny bit. This is one way I can afford to continue to make content for this channel. Thank you for your consideration. :)

[joshuabrown]

Just purchased this machine. It's my first dive into the world of 3D printing. I'm so excited!

[madebydjs]

Really appreciate the effort, Fedor. Your insight is invaluable. Just found an A5M deal from a 3rd party vendor for $278.07 total. I'd also like to add that I've been a viewer since your channel's early days with the Voxelab videos, and your channel & content has certainly grown to be of my favorite. Thank you for everything.

[tbip]

I think this is going to be my new printer. My old printers have sat unused as i could never get them to print reliably. This new generation of core xy gives me hope. The removable nozzle is genius

[tbip]

Just got this printer. Very slick and well built. Literally followed the manual and it printed out of the box. Only on print two but these modem core xy printers/tech are amazing

[kwedl]

Full klipper/fluidd access would make this one of the best printers out there right now. It would allow for things like KAMP and also adjust the loud fan even more. For now i just replaced it with a 120mm slim PC fan and finally it's silent.

[doomed]

I just ordered one. I got a basic ender 3 a couple of weeks ago and have been shocked at how painful it was to assemble and use. Sd card slot died and it likes to stop extruding halfway through prints. I have high hopes for this new printer. I was really looking for ease of use and printing and not tinkering. I think this will be very nice.

[timothyfickett]

its my first machine. I'm really digging it after a month. Building the enclosure right now.

[FSF]

Seeing where things were just last year, it makes me so happy to see low cost printers with so much packed in. The value proposition is crazy compared to when I bought my Aquilas.

[konjikisx]

Not releasing Klipper is the number one reason I didn't get the Advernturer 5M Pro and the bed size comes into a close seconds. Since QIDI fixed the x line up I got that instead. So far I'm liking the X-plus 3... Though I hope that quick change nozzle idea inspires the rest of the market.

[PrintsLeoD]

Awesome review! This thing had me at the price, lost me at it's implementation of Klipper, and then got me right back when I saw that hot-end!! Great feature to highlight and I wish more companies follow suit.

[Andre_M_D]

Nice work Fedor. I also like the intro. I can tell you are putting some hard work in. I have been waiting to see this video. Cheers

[nomadtechyittv]

Dude I am so hyped to receive this printer from Amazon for $299+ tax ($320 or something) as of 1/29/24. There are so many features I am excited about! I bought an Ender 3 pro about 8 months ago that is currently MORE EXPENSIVE THAN THIS PRINTER. And I got less than half the features of this printer. From the moment I had to build everything on the Ender out the box to all the clogging and wiring you outlined, oh and the manual leveling I do every few prints. All those things are so annoying tasks that this printer looks to eliminate. Oh and the drag, drop, print I am so looking forward to. Tired of moving the 2GB microSD back and forth from the PC to printer. Drag and print baby, love it! 2 more days. I wonder how much quicker it will be? I need to mass produce products so depending on how this printer does, I may snag more

[vhoward]

Since they are using klipper, i do agree that they need to release their source under the opensource license. But I also see from their point of view that they are providing tech support and it makes it easier if the user hasn't modified it. What they need to do is release the source code and then specify that if the user makes any modifications that makes the printer not work, they they will not be held liable for repairs. So wait until the printer is out of warranty before doing mods.

[MondoMiami]

Newb here. Just ordered this after some very disappointing experiences with Creality Ender 3 and Longer LK5 Pro. I hope the third time’s a charm.

[paulbarnard]

super excited about this machine it's arriving today, I'm an industrial design student with the need to rapid prototype pretty regularly this is going to be a big help I'm tired of having to constantly tinker with my ender 3 v2

[ianr]

Agree 100% that not releasing their klipper changes etc is not ok, and they need to correct that. That flies in the face of the open source reason it exists, and not what we want these companies defaulting to. Making a good base HW is not enough if the SW is effectively locked and 'stolen.' MY first 3DP was from their sister company the Voxelab Aquila (assisted by your may early vids.) :) having now added a couple vorons, and I've purchase spools of Flashforge filament. Which I won't be doing any more until they correctly release their changes etc.

[Horsenb]

Its a shame that they don't offer a Max version like the other two companies. I'm in the market for a rtr cxy printer that's closer to 300mm cubed and the only 2 that come close give hesitation. Bambu and Flashforge are really dropping the ball here driving customers like Me to their competitors.

Another great video BTW I like the way you format all of your reviews

[JackWu-ld]

Loving the Adventurer 5M action in this vid 🙌🔥! I'm a hardcore Flashforge AD5M Pro user myself - out-of-box ready, swift nozzle-switching, you name it! Anyone who enjoys flawless first layers should check it out. Happy printing! 🚀🖨😎👍

[nomadtechyittv]

Update: I received the printer and LOVE IT! Night and day from the POS Ender 3 Pro, I already listed in for sale thats how much i dislike that printer. The default speed was 300mm, I was shocked how fast it was printing. It was more accurate than the Ender 3 and much faster - unfortunately I am not sure how to relay the speed per material used but printing the same gcode, the Ender took 4 hours and the 5M took only 34 minutes!. The end product was clean AF!

I have a few questions about the printer:
1) Where do I find the idle fan settings? I did not see it on the on screen display
2) Can I use PLA with .6mm and .8mm nozzles? I looked at the Forge website and it seemed that they did not suggest using the regular PLA. Thoughts?
3) My external camera does not seem to work when the job is running. I have the latest firmware installed. Seems like each time I turn on the camera and video, it turns off again in the settings. Anything you can suggest?

[TheKonamiMan]

Was able to get one of these for $100 and this video has me excited for when it arrives in Wednesday. For $100 I can definitely deal with those cons.