OEM STYLE LIGHT BAR SWITCH INSTALL | TOYOTA 4RUNNER

———————————————————————————————————
DISCOUNTS!!
PEDAL COMMANDER 10% = TRDJ10
ACCESSORIDES $15 OFF = TRDJON
TUFSKINZ 10% OFF = blueTRDjon
TACTILIAN 20% OFF = BLUETRD20
DRZ OFF ROAD 15% OFF = BLUETRDJON
LASFIT LED LIGHTS 10% OFF = blue_trd_jon10
_____________________________________________________________________________
Amazon associate links AND other affiliate links allow me to produce more content for you all. It also allows you to get ideas of future upgrades you may want to have! Thank you for your support.

#lightbarswitch #4runner #oemswitch #offroad #trdjon #trdpro #4runneroffroad

[jneil]

I love how every instructional video of removing the dash are from the angle behind the person giving a great shot of their backs while they do it.

[austinwilliams]

If you are feeding the wire through the small grommet hole at 1:16, I recommend drilling a hole through the grommet and feeding your wire through the grommet. That way you protect your wire from the sharp edges of the fire wall and the hole is more weatherproof.

[ricardodesouza]

Where do you tap in the the extra red wire please?

[ricardodesouza]

What about hooking up the other red wide for the dash lights? Where does it go?

[Neirteam]

The only channel I need for all my 4Runner install questions! Outstanding, thank you!

[Topomh]

Good to know you can move the aux power up top... Ran into same problem with switch notches and cursed Toyota for a bit. Figured did that to keep assembly all the same but still a little dumb.

[russellwebb]

I am so glad you did this video, I just ordered me the Low Profile brackets and ditch light switch from Cali. Cant wait to put it on. Love your vidoes

[paosaelee]

Referred to your wire connections and tadaahh!! I told myself "Jon you're a genius". Thanks bro!

[g.fortin]

Wish you had spent some time on relay wiring and choosing a fuse size. Nice filming and great switch install.

[alexsanchez]

Which wire would you tap into to make the switch work with your dash lights.

[jtravel]

Im pretty confused right now. So i was able to wire this switch to a light bar. the light bar turns on and off with no problems whatsoever. But when my car is off or i turn the light bar off, the light bar icon on the switch doesnt turn off. Any idea why this would happen? Or is it supposed to be like that? Im worried itll drain the battery

[jetshepherd]

I have mine all set up already just got it today came with it off the lot but it won’t turn on

[trueword]

4:41 I have a PRINSU light bar and the wires are blue, black, and white. What are the codes? Blue positive? 🤷

[samvigil]

Sweet man. Just ordered my light bar switch. Looking forward to this!

[theDeitz]

I would leave the grommet in the hold, best to punch a hole in the grommet and feed your wire thru the hole. Without the grommet the wire insulation could get damage causing a short and or a fire.

[bobmarshall]

As others have said, you should NEVER run wiring through a metal hole in your vehicle without bushing the edges of the hole. Some of these holes can be razor sharp. Also, never leave unconnected wires behind the dash without insulating the bare ends.

[Eyepod]

So did u just push the rubber grommet back into place in the firewall over the wires?

[silverrunner]

The new spot you put the inverter switch were you able to reach up from the bottom where you pop open the panel?
I tried to move mine down but yes they have different notches on the openings.

[cheezyspizza]

Please please do a video on how to wire the switch to stay lit like the OEM switches. Thanks in advance.

[nguyen]

Question, is your relay button light still on while the car is off?