⚠ How to configure Thrustmaster TCA quadrant and add-on in FENIX A320 💡 - Let's fly! ✈

#fenixa320 #fenix #thrustmaster #airbusa320 #msfs2020 #flightsimulator #tutorial

Do you have challenges setting up your Thrustmaster TCA quadrant and add-on in the Fenix Sim A320 correctly?
In this video you will learn what to look for and how to proceed step by step to configure everything correctly!

If you liked the video, then leave a thumbs up and if you do not have a subscription, then press the :yt: S U B S C R I B E - button.

If you want to support me beyond that you can also visit my "tip" page and leave a small tip in the "jar". THANK YOU!

Timestamps:
00:00 - Intro
00:21 - Welcome to the Tutorial
00:38 - First steps
00:47 - Create new Profile
01:15 - Important Settings
01:34 - Select correct axes
03:16 - Select the correct sensitivity
03:45 - Preparation for configuration in the cockpit
04:14 - Configuration of the thrust levers
07:11 - Configuration of the flaps lever
08:17 - My personal settings for the sensitivity
09:10 - Where to find further information on Fenix A320 (FAQ)

[SNUGaming]

⚠IMPORTANT: Due to some updates (Firmware TM Throttle Quadrant) and now different versions for some useres the axes "Throttle 1 Axis / Throttle 2 Axis" won't work! Try it with the default setting "Throttle 1 Axis (0 to 100%)/Throttle 2 Axis (0 to 100%)". This might help. Otherwise do the firmware update and the hardware calibration.⚠

If you liked the video please leave a thumbs up! 👍 Thank you!

[YounesCheikh]

The best tutorial ever, I spent 5 hours looking for the right one till I found yours ... Thanks a lot

[luismontiel]

Beautiful tutorial, I watched another tutorial with someone else but they were no where as specific as you were thank you, earned a subscriber

[captainden]

A video that really helped set up the quadrant. Thank you so much!

[asimcaptain]

thanks so much for this vdeo!! only one i tried that explained the axis change!! thanks again!

[Planeguy_-nnjf]

Thank you so much you’re amazing it has really been stressful before I saw you 😁

[antoniopettini]

I watched several video for tca fenix calibration. This is definetely the most clear. Very important, as the video points out, to not set up idle reverse close to idle otherwise reverse doesn, t work

[williamgraetsch]

Doesnt work for me. Pls help me. If I try to calibrate the blue numbers in the right and left corner doesn‘t go under 42%, due to this I can‘t calibrate the fenix 😢. Pls help 🙏

[cuberitoefn]

Hey thank very much it work now the problem is the gear and the autobrakes 😊

[Daveist]

You have helped me immensely spent 3 hours fumbling to get throttles working watched your video this morning and it was so helpful

[TheONE]

Hey it works but when I go to the menu and then back it goes to toga and I won’t go back 😢

[PLOplo-yyyg]

When I connect the flight joystick it detects it but the other part does not detect it. Does anyone know why? (I'm from Xbox)

[jrjones]

Is there any way to calibrate TCA Boeing throttle quadrant for Fenix A320?

[edwinsoto]

I got to calibrate throttles through the mdcu but when i put it in idle reverses come on even if i dont pull my reverses back then my flaps with working opposite even when i checked marked the reverse on control settings but i clicked it again to see if it would fix it and messed up my whole throttles! Now my throttles dont go to idle and stay stuff in climb. To 50% up to 100% but no idle or reverses. Idk this setup is so complicated for no reason. Any help would be appreciated

[Intgral]

I simply cant get it to work, any reccomendations?

[PhilippBayer]

I messed around with the thrust levers all day - catastrophic! Then I found your video while I was in bed, got out of bed and copied everything - it works!
Thanks 02:05 am - Good night and thank you very much!

[TimAlcoser]

This finally resolved my issues I have been having since day 1. None of the other videos were this intricate and detailed. Thanks!

[netnghieng]

Thanks you very much! I have just imitated you to calib my throttle on Fenix Sim. I really feel happy and sincerely you. This video is very understand.

[josecitoaviacion]

Wow thanks dude I’ve been looking for days how to calibrate my Airbus quadrant and until now it finally fixed thanks for the video Like!

[hanshix]

This is one of the best tutorials I've seen to date. However, I found a fix by setting the null zone is the MCDU to 0.5 fixed the reverser issue for me. See you in the skies!