Building a 3kw 60v E-BIKE

Building a DIY e-bike from a Voodoo Bizango with a 60v battery and a 3000w rear hub.
This is a voice over in detail of the processes i went through from start to finish.

Thanks for watching
MOTO MACHINEZ UK

Follow/Contact on Instagram

[kahdmus]

A cliff-hanger ending...you tease Johnny!! Can't wait to see you in action on this one! I had a similar issue with my bike when it came to real estate and debating where to mount everything. Ended up adding a rear bike rack and placing controller and wiring in the controller bag, on the rear rack. Its neat, tidy, easy to access, and was really my only option; just not a fan of bike racks, lol! Great to have a video from you, and looking forward to lots more motomachinez content! Great stuff, as always!

[davidcoates]

What I did with my cables was take photos of all the plugs, remove the pins from the plugs, cut off pins, cut cables to length, solder pins onto wires and reinstalled pins in plugs using photos as reference.

[rogereheadbyrne]

Can't wait to see this ebike completed! Stoked for you mate, Im sure you will enjoy the results Great Video Johnny!

[losbastardosmtb]

Buzzing to watch this mate can’t wait to get home better watching on tv than the phone lol

[HinoKamiKaguraGod]

Just cover the last bit of cables in black tape for a slick look and then its amazing

[scottrocks]

3:05
If you only put one washer on one side.
The wheel won't be centre
It will be like 3mm out on one side.

And on some bike frame you may need the plastic spacer for the disc.
Especially on front hub motor.
It's best to check first before cutting it off.
I've only needed one time

[EboyzLondon]

Ok the hub may have larger gauges, but honestly other than that for £1300 is abit much! We can buy a £500 MTX kit and vesc it, or any other 50a-80a controller for a lot less!

You should crack it open and do side by side with your mtx wheel.

[E-bikeguy]

I see how you did the washers on the torque arms for the nut, nice job. And now the fun begins 🤪💯🚲💨

[losbastardosmtb]

Ordering this on monday can’t wait 🤣 looking forward to your test video coming out too

[wastedWizard]

thats really cool i still have a 1500w rear hub with max speed of 35/40mph on a 52v 18ag battery but the acceleration is not that great but stil works fine

[ianmangham]

Torque washer goes Inside Frame 😊 3:32, that way it's trapped even if you lose the nut.

[richie]

Needed a washer on there do it had mere surface to clamp to . That will chew into the alloy frame mate

[edrogers]

At 5:24 There is a proper way to use a crescent wrench. You are holding in the way that would be taking the nut off.

[praycandy]

Thanks for the video! it helped me a lot :)

[DR-csdl]

Class build mate, how water proof is it? Thinking of getting one of these for the commute but doesn’t fill me with confidence when I can see wires

[jourdansharples]

What size wheel motor did you put on the back bud

[WoolyChewbakker]

And where are you going to ride this bike?

[theamazingcow]

Can you send me a link where you got it I'm trying to save up for a conversation kit

[leopoldwalter]

can ulike link a parts list or link were u bogt it i dunt rech the website

[maciejburchardt]

The level of advancement ( UK & Ireland) on the electrification subject of bicycles is on the same level to the system of the municipal sewage that you have there 😂