Sovol SV07 Beginner set up tutorial, Assembly, Bed leveling, Calibration, Common issues

Hi, it's me. We are going to have SV07 set up tutorial this time.
The content is very much focus on the "problem solving" and help you get start with the printer. As I mentioned on the sv07 review video, this printer still lack a bit of refinement work and attention to detail. It could be due to my unit is pre-ordered unit. But, many small issues were found during my test.

If you think this video is helpful, please let me know in the comments. Or, you think there is something that I didn’t cover, please let me and others know.
Please do consider subscribe and hit the like button. Your support is the reason why I spend time making these videos.

My affiliate link to purchase Sovol SV07, no extra cost on you:

SV07 Review:

SV07 Bed Leveling tutorial:

SV07 Input shaping guide:

SV07 Extruder common issue repair guide:

Y axis end stop Stl file:

Gantry leveling tool:

Print Configuration available to download, with guide:

Intro: 0:00
Pre-assembly checking list(Common issues): 0:46
Checking list #1: Wires 0:51
Checking list #2: Y Axis end stop 1:16
Checking list #3: Gantry part cooling fan 2:19
Checking list #4: Bed spacer 3:32
Checking list #5: Build plate flatness 4:28
Checking list #6: Anti-backlash nut noise 5: 28
Checking list #7: POM wheels 6:05
Assembly: 6:38
A Step 1: Marry gantry to base 7:00
A Step 2: Attach screen holder 8:13
A Step 3: Extruder on carrier 8:32
A Step 4: Mount gantry cooling fan 8:48
A Step 5: Fliament holder 9:08
A Step 6: Connect wires 9:24

Calibraction: 11:00
C Step 1: Eccentric nuts and belt tensioner 11:15
C Step 2: Anti-backlash nuts 12:15
C Step 3: Gantry leveling 12:39

Slicer setting: 13:31

#sv07
___________________________________________________________________________________________________
#3dprinting #3dprinter #3dprint #3dprinted #creality #sovol #biqu #bigtreetech #anycubic #xyzprinting #flashforge #prusa #ender #ender3 #ender3pro #ender3v2 #ender3s1 #diy #diytool #3d打印 #impresion3d #3дпечать #drucken #druck

[dprintdawn]

follow, thank you for all your effort to help the Sovol community!

[jsterling]

Thanks for this video. Very helpful to use first timers!

[Dorpz]

thank you so much, i was looking at the user guide's wiring section and i was so confused but you've made it very clear!

[MikeWalker-kg]

Huge thanks for your videos and files! really appreciate all your help!

[TheLookingsunset]

Very helpful, thank you sv07 is our first 3d printer, there so many new things to consider, luckily there’s a logic here. I wish i knew what “tight enough” for the belt and screws meant, i will go with a gut feeling

[JPeezy]

Good video. Thanks for your help. Will subscribe. My wheels and springs came off of the screws on the bed and I had to figure those out. Still don’t know how to put filament in the extruder but I’ll check for another video.

[NghtRder]

Thanks for the video, I am having trouble understanding what labels you are giving things, perhaps baked in English sub titles (Auto captions have no idea what you are saying either) would be a good addition. Also I understand English is not your first language and appreciate you effort to speak it

[ivolol]

Yes a bit of lube on lead screws never hurts

[TheFishbearpig]

Great stuff, I adjusted my bed level on the sv07 based on your tutorial. Thank you!
Could you do a video where you look into input shaping? I did the input shaper auto-calibration on my machine and it messed it up realy bad and I have no idea on how to reset it to it's previous values. Do you have any advice?

[monsterstorm]

What size is the part cooling fan behind the extruder?

[ipdjbt]

The SV06 is so damn good I don't know why anyone would buy the SV07 instead.

[erickschwartz]

Can you please help. Im having problems trying to get my sv07plus calibrated. I do the z tilt first, then the z offset and save. Then do the bed level. Got through it fine the first time. Tried printing the benchy. When it got about halfway done it started making a scraping sound and then knocked it off the bed. Tried several times and every time it did the same thing. So i tried calibratting again and this time it did the same thing. So tried it again, now when i do the z offset when i go to lower the extruder after lowering once at 5mm, and once at 1mm, and try going 1mm it says out of range. Also when trying to level the bed lile this i cant even loosen the bed srews enough to get it to even get anuwhere close to touching the paper on the left side, and on the right side the extruder touches the bed plate when it lowers. I am new to 3d printing and am lost at this point.

[Toblox]

I followed your tutorial and it started to produce smoke

[robertschenk]

Seit gestern steht der SV7 auch hier aufgebaut, aber drucken kann ich nicht. In der Y-Achse scheint ein Fehler zu sein und der Druck verschiebt sich. Man kann dann nur abbrechen. Ich habe deinen Teil mit der Kontrolle des Y-Anschlags nicht verstanden, vielleicht kannst du das noch einmal anders beschreiben worauf man hier achten muss?