SV07 Input shaping guide, Resonance compensation

Okay, this is not a full tutorial video for input shaping. It just a simple guide by using the accelerometer that come with SV07. Since many people were having truouble using this and requested a guide, so it is here.
Highly suggest you to run the ringing test file from USB drive. Only make change if the result is not good. Also, do all the basic calibration before you doing this.

My affiliate link to purchase Sovol SV07, no extra cost on you:

SV07 Review:

SV07 Beginner set up tutorial:

SV07 Bed Leveling tutorial:

SV07 Extruder common issue repair guide:

If your result does not have any improve after calibration. You can follow the offical guide to do the input shaping calibration: Or, Resonance Compensation.

If you think this video is helpful, please let me know in the comments. Or, you think there is something that I didn’t cover, please let me and others know.
Please do consider subscribe and hit the like button. Your support is the reason why I spend time making these videos.

___________________________________________________________________________________________________
#3dprinting #3dprinter #3dprint #3dprinted #creality #sovol #biqu #bigtreetech #anycubic #xyzprinting #flashforge #prusa #ender #ender3 #ender3pro #ender3v2 #ender3s1 #diy #diytool #3d打印 #impresion3d #3дпечать #drucken #druck

[Garage]

Wow that's strange it got worse! Guess they did a lot of testing for the factory calibration. May have something to do with the actual default speeds used as well. Great video! If a word is particularly hard for you, I recommend breaking it down into parts. Accelerometer is axe-cell-lur-rom-meter. Hope the suggesting is not insulting. Love the effort!

[realPinkfong]

Please make a video on how to correctly tension the belts

[lornelorne]

Can you show how to do this on the SV06 Plus?

[joeles]

I did mine following the book and it made the printer unusable with massive layer shifting.. after watching this video I noted that the accelerometer was reversed here compared to the manual.. how did you know which way the accelerometer was supposed to be?

[paoloz]

Great info. What is the print placed above the large fan for? What advantages? Where can I find the file? Thank you!

[nolocrema]

where i can buy input shaper to sovol sv07plus?

[goldendredger]

I have the same issue as the other post.
I followed instructions and ran through the process.
Mine factory was set at x40 and Y40. I did not note well enough the setting to the right what letters where there.
After running imput with auto calibration i got X53 with ei. And Y46 with ei once and mz something the next try.
However none of that matters as the printer is no longer useable at this point. It now moves with tremendous force. Switching directions so abruptly it just skips teeth on the belt and of course thats layer shifting. I cannot find a reset to factory option. I manually tried on the lcd screen to adjust the slider bars back to the original 40 on each axis and i think they where on 2 hump setting. But it will not save my manual settings. Says in text in lcd above slider bars manual settings must be done in config folder and saved.
Well i open config folder and have zero clue how go make any changes. I have had this 7plus for 2 weeks and have wasted hours trying to get a decent print. I am not new to 3d printing. Been doing it for last 8 years. Also have the Bambu X1C. I got this 7 plus for the larger prints. But i am so pissed off at this entire thing. I hate this printer. My first time using Klipper and it sucks a fat ****". If you have never used it and simply dont know anything about it you are just plane out of luck. Hours reading online and nothing ever gets to the point. I got one easy question. Reset imput shaper to factory settings? How hard could that be? Well pretty dam hard. Open config fold find line that reads " your a sucker for buying this junk" and enter in the amount of money and hours spent getting nowhere here. Now get out your calculator and take that money spent X the hours spent researching and trying to get it going then divide that by 1000 and you now have X which is your iq. Yes its negative because if you had any brain you would not have purchased this junk.
Then hit save and close. Reboot and nothing changed or it only gets worse.
Sorry i have just spent the last 6 hours of my evening trying to calibrate the ringing in the prints. Its now 2:30 am and i stopped working on the sov7plus and called it a night. I have read watched videos and nothing simply shows how to put it back to its original settings.
Ok well i guess i need to read and understand what is happening. I read the klipper page access the config folder and guess lines they show are not the same lines in my fliudd page of clipper. Shows imput shaper. Under that should show X and Y and the values. Mine shows a buffer number and something else. I am so lost at this point and tired i dont remember what it was. But it does not match the klipper page that shows the numbers. Rediculous.
Why is the auto calibration making the printer so aggressive?
It did not help anything. Just slams back and forth skipping belt teeth. Oh well guess it sits there till i get pissed and toss it out.
Thanks for your videos. I have referred to them several times over the last 2 weeks trying to get a half decent print from the 7 plus. But nope no luck. I bet i could pull the board and electronics out and build my own setup with more success. Who knows.

[RealShebang]

I'd love to do this, but the screws are overtightened so much on mine, it'll strip if I try. So I guess I'm screwed. F-ing sovol.