How to Cut a Compact Laminate Worktop? Step-by-Step Guide

Cutting a compact laminate worktop, also known as solid laminate, can seem daunting, but it's quite manageable with the right tools and techniques. In this video, we’ll guide you through the process, ensuring you achieve a perfect cut every time.

Timestamps:

[0:00] Introduction: Tools needed and preparation
[0:15] Tools Overview: Recommended saws and blades
[0:39] Cutting Process: Step-by-step cutting instructions
[2:03] Achieving a Clean Cut: Ensuring no splintering or chipping
[2:19] Sanding and Finishing: How to finish the edges
[2:35] Oiling the Edges: Why and how to oil the edges
[3:07] Final Tips and Advice

Visit our website:

Step-by-Step Cutting Instructions:

Tools and Preparation: Use standard hardwood cutting tools. A sharp blade is essential for clean cuts.
Initial Cut: Start with a shallow 2mm cut to avoid splintering, then increase the depth incrementally.
Sanding and Finishing: Sand the edges with 240 grit and apply a chamfer. Note that you should only sand the edges, not the surface.
Oiling the Edges: After sanding, oil the edges to enhance the colour of the core.
Why Compact Laminate Worktops Don’t Need Edging Strips:
The solid core of compact laminate worktops means you don't need edging strips. Wherever you cut, you expose the same durable core material.

Tags:
How to Cut Compact Laminate Worktop, How to Cut Compact Laminate, Solid Laminate Worktop Cutting, Cutting Compact Laminate, Compact Laminate Worktop Edges, Kitchen Worktop Cutting, Home Improvement, DIY Kitchen Renovation, Durable Worktops, Compact Laminate Tools

[iananthonyasilo]

This video is very helpful. I still remember trying to cut compact laminate using 4Ah battery on a circular saw. One pass on a 3m and the battery is dead.

[Smithb]

These videos are really helpful thank you 👍🏻

[simonoakes]

Is this suitable for use as a splashback ?

[kalinninov]

Hi, I would to ask you for advice. How can I connect compact laminate worktop cuted 2*45 so to have finaly 90 degrees angle? Thank you in advance!

[HarveyJohnWillmott]

What if I need to cut a curve in it, to scribe it into a wall nicely?