Mk8 Golf R H&R Rear Sway Bar Install

2022-24 Volkswagen Golf R H&R 25mm Non-Adjustable Rear Sway Bar:

Moog K750809 Endlinks:

Hardware Needed:
N10765801 Bracket Bolts Quantity 4
N10776501 Endlink Through Bolts Quantity 2
N10286110 Endlink Through Bolt Nuts Quantity 2
N90183804 Endlink to Sway Bar Nut Quantity 2 (not needed if your get Moog endlinks)

Extra Material:
Valvoline PTFE grease or equivalent
Paint or Rubberized Coating (optional)

Torque Specifications:
Bushing brackets - 20Nm +90°
Through bolt nuts - 20Nm +180°
Endlink to sway bar nuts - 55Nm

[Sam-egt]

Thank you for conforming that moog K750809 fits Mk8. I have been researching for a while only to get mixed info.

[dustind]

Thanks for the part number(s) info on the single use items..

[nobleman-swerve]

Tip for everyone looking for more clearance, you don't need a exhaust hanger tool to get some drop. Simply unthread the bolts (good idea to support the exhaust while doing this) that the hangers attach to the body with. Can give you some precious inches of clearance for getting the stock sway out of the way.

[LogieD]

Those bottom zerks on those sway bar links look fun to grease

[JRStefanos]

You probably don’t have the summer tires on since you’re in PA and the weather still isn’t great.
I’m looking at doing the same H&R RSB. How are you liking it so far?

[Sam-egt]

Considering this exact upgrade. How is the ride?

[Golfr]

Why would you even think you need it with ACC? Don't you have ACC?

[gwagb]

Is it a necessity to torque them that way?