Mavic Air 2 Crash 🥺

[no-life]

Did you guys even put on the propellers correctly

[pdtech]

Tip- before flying, open out your props, to prevent that initial vibration.
Also check you have the correct prop on the correct motors!

The rear props look correct but the front ones are on the wrong way round....😮

Note 2 props spin clockwise, 2 spin anti clockwise and the props have to be pitched accordingly!

[diksalomon]

Props are still folded when you start the motors running. Then the front-right propeller is still unfolding when you tried to throttle up thats why it crashes.

[yeltsinandrew]

The vibration in the start could be a local propeller set used and for 4 bldc motors two clockwise and and two anticlockwise must be used the back side of drone lift but not front you must have swapped the clockwise and anticlockwie Propollers so make sure it is in correct clockwise and anti-clockwise motors

[hiki_neat]

Great skill and also great camera works.

[valzzu]

Also u should learn the motor start and stop command :) just move both sticks to the inside corner and it should stop the motors

[hippocreation]

This is why Tesla will never set up a factory in India.

[Caden-MRwhitevr]

Sometimes
People are not smart and run through things
Trying to get them done as fast as they can which makes a mistake when that
Happens

[thedefaultguy]

Always check ur props if they are in the correct order and position, these basic checks are just like in real life where a pilot goes through pre flight checks before taking off
That’s why u should never purchase a expensive drone if u inexperienced I mean think about those traning ppl take to fly such dji’s those are not just there for show purposes right
U should have bought a toy grade drone first which costs fraction of the cost of what this drone costs ( the general functions are same as the dji so U will get a little idea ) and if u crash the cheaper one it won’t even break because they are light weight but these ones are heavy and if they fall that’s pretty much game over

Also try to put some prop guards it will save ur props if it falls to some extent
Also read the damn manual if it’s ur first time lol

Feels sad to watch this even a small drop like this could take of some pieces off ur propellers and it will severely harm ur drones stability in mid air

[raystravelbali]

You put propellers at wrong position. Thus, you need to.open wide all propellers' blades to straight position to avoid hinge shaft crack on its main body due to hard vibration from the motors on the initial/startup. If blades arw all wide open, there will be less vibration from the motor onto the main body

[MrFahadaziz]

I do not unfold my drones propellers no more. But I never lift off as soon as the motors start. I let them spin a while and then lift off.

[sufianwahi]

Maybe doing mistake while plug n play the propellers.. Please check A & B propellers plugin must in right position ..

[justbraks]

Dji clearly says in the manual that you must *unfold* all props before taking off😅

[valkyrieaerialphotography]

Improper propeller installation, causing the drone to flip over. Also, failing to unfold the propellers, before engaging the motors, will cause stress fracturing, under the Air 2's arms. Research, before you fly, helps GREATLY!

[vivek.ananth]

All the propellers are marked white. Please make sure the propellers are installed correct. Black to black white to white. You can see the markings on the propeller at the end

[defnotops]

1 the props can be closed since centrifugal force will open them
2 he fucked up the props stetting
3 its not broken its just gonna stratch it

[jackzhang]

No surprise by seeing sitting maneuvering

[travellingselement]

No… it’s the problem with propeller fixing… the front propellers has to be 1side A “type and 2nd side B “type
Back side 1side B “type and 2nd side A “type…

Drone buyers must complete IQ test before buying🤗

[rctd]

When you take off with the propellers still closed it puts huge stress on the motor