Full MikroTik MTCNA - L2TP

Hello and welcome! In this video we will be going over how to configure an L2TP Server and Client on MikroTik. We'll also be doing something fun as we will emulate configuring routing between two remote offices via L2TP.

Support the Channel:

Social Media:

EVE-NG Setup:

Timestamps:

00:00 - Introduction
00:15 - Overview
00:38 - L2TP Server
03:13 - L2TP Client
04:53 - L2TP Client (CLI)

Credits:

Thumbnail: Created on Canva

Thanks again for watching

[jacobosmossel]

Haloo
Weereens, dankie vir die awesome video!

[amin-koyr]

for additional information of my comments :
I wrote a static route that connects the clients(difrent range of head office) to the head office, now this route is regularly cut off and this route must be written because it is constantly out of reach(blue color). The exit gateway of this route is l2tp server.

[danielnyman]

I have a strange problem with my setup. I have a Mikrotik router acting L2TP-client for site-to-site network, all clients can access the network on remote site in both directions. I can also access Mikrotik router management from remote site, but the Mikrotik itself can't access the remote site with ping or other services. Any ideas what can cause this issue?

[aimn]

How can i access files on remote site from my client on Main office after successfull conection to remote site?

[amin-koyr]

i have problem with this server after few hours in the routing list my static route go to unreachable

[kuwwatmirabow]

Can I use one secret to all my other sites?

[jeanmitcheljarresanluis]

do you remote this client using winbox??

[itzizag]

how can i route my all internet traffic through vpn site 1
and other question how can i route my windows pc internet traffic through my ISP not to VPN.

[Anavllama]

What is missing from this simple example is the need to allow port 1701 on the input firewall chain and if the L2TP server device is behind a publicly accessible router, the need to port forward 1701 to the secondary router (MT).