Honda Lawn Mower HRR Transmission Drive Gears

Honda Lawn Mower HRR Transmission Drive Gears

[Aussie_Pest_Popping]

Invaluable tips with relation to the drive gear installation. Made it so much easier mate!

[paulnewell]

I know there will be a really good answer to this question, 'why was there no lubricant in the gear/s on dis-assembly and none on re-assembly'?

[allenstaley]

Excellent information! Just what I was looking for when I disassembled my mower and didn’t remember the sequence the gears and washers went back on. Very detailed and easy to follow reassembly instructions. Thank You!

[jrsca]

Great camera work & description. Got mine apart and couldn’t remember the sequence to reinstall the parts. Life saver - thanks - now I won’t have to explain to my wife why we need a new mower.

[starblazers]

Thanks for breaking it down & good quality video! 👍

[Doml]

Thanks for "dot" side info. Will help a lot

[rexrexford]

Excellent video. Great detail, answered many of my questions.

[cookiemonster]

Thank you so much !! I bought a used but very good condition hhr216 and never owned one before . So was worried why it was abit of resistance pulling back thought a
Something was wrong

[NeilSpettel-bm]

Great video, I'll be watching your content from now on. Cheers!

[mrdroney]

Thanks for this, helped me solve my one wheel not driving, not a Honda but principle the same . Thanks

[tomturner]

Fantastic video and great commentary! Mower runs good as new!

[rspenn]

Great video. Do you have video that goes beyond where this video stops. I want to replace the washer and clips between the transmission and height adjuster. I dis-assembled to the point of removing the height adjuster and 22mm clip between adjuster and transmission, but cannot remove the axle rod. The collar on the left side appears to be fixed to the axle rod so I can only slide the axle rod a certain distance.

[chrisbarnes]

Great video thanks for posting. My gears wear out every few months, do you think this is a design fault with this model.

[mrnisbet]

Thank you for the video! This has been a big help with my repair. I did have a question. If the bushings in the height adjuster do need to be replaced, what are best practices when installing the new bushings? Do they require any lubricant at all? I wasn’t sure since they are plastic. Also do I just use a hammer to tap it down into the wheel assembly hole?

[matthewcaldwell]

Can you take all the gears off if the trannie is shot? I did all the regreasing and cleaning gears. Mower rolled backwards. Took it out for test run and everything seemed fine for minutes. Then the trannie froze. Won't roll backwards now or self propel. Yes belt is fine

[AngelaI-kk]

So this might be a silly question but what size snap pliers were you using as I just bought a pair and I think they’re too big

[AlexV-pfio]

Why u r talking about dots, arrows - if originals do not have those?

[SWARLCPL]

Great video, what if your new Pinion Gears have a L or R and no dot ? Thanks

[lewisburton]

dont think he said why the 1 dot on the leftwent in and the 1 on the right was facing out?

[ciphercode]

Ive a 2019 hrx217 k6vla versamow that is kinda dragging the left rear wheel and when it does roll its making a clacking noise as it goes around. The drive still works fine. It seems ti only be like that when im pushing it without engaging the transmission. At first i thought it was a wheel bearing, so i replaced the left wheel where im hearing the noise. Noise didnt go away obviously. At a glance the gear looks ok, tire sits nice and straight, shaft seems tight. Im really stuck on this one, please help if youve any ideas.