Honda Lawn Mower Rear Wheel Replacement Part # 42710-VE2-M01ZE

This video provides step-by-step repair instructions for replacing the rear wheel on a Honda lawn mower. The most common reason for replacing the wheel is when it is damaged.

Additional lawn mower repair, troubleshooting tips, help with finding your model number and part replacement videos can be found on our website:

All of the information for this wheel replacement video is applicable to the following brands:
Honda

Tools needed: 12mm socket

Model displayed: Honda lawn mower HRR216K9VKAA

Connect With Us!

Don't forget to like and comment on this video, and subscribe to our channel!

[Coco-qzfn]

are there compatible rubber wheels for this, the hard plastic is horrible for traction and longevity.

[randyriley]

I started with a 13 mm socket, but it was wobbly. Change to a 12 with no problem. Was simple after that. Thanks for sharing!

[TheArecf]

Per Honda Customer Support, the tightening torque for the rear wheel mounting hardware is 18 to 20 ft lbs.

[jaygoldberg]

I have an older hrr2160vla. The original wheels were mo0ze. I received the mo2ze which replaced the mo1ze which replaced the mo0ze. There were half as many "cogs" in the newest version, but it still fit. However, the original had the curved washers oriented as shown in the video. But in order for the bolt to be completely seated, I had to turn the curved washers upside down. Interesting.

[chamber]

Great simple video, thanks. For my hrr216vya - WalMart: 2PACK Honda OEM Rear Drive Wheels HRT216 HRR216 HRS216 HRZ216 Part # 42710-VE2-M02ZE

[johnmontana]

I cannot get the rear wheels off. The drive axle turns when I turn the nut holding on the wheel. This video makes it look so easy. Is there a trick to doing this?

[dathead]

What does the wave washer do exactly ? It of course fell off when taking wheel off so wasn’t sure which way to orient it (hadn’t seen this video yet) and think I may have done backwards.

[hdept]

Looks easy, but we all know better, don't we?

[jamietrombino]

When I removed my old wheels, the flat washer was on first, then the curved washer. This vid says to do the opposite. Which way is the right way?

[sriracha]

"Remove the spark plug wire, so the engine doesn't accidentally start" 😂

[michaelrosky]

Can anyone help me find the flat washer for sale? I located and purchased the curved one already.

[Karstark]

oh if only it was that easy for me, that bolt sheared at the threads inside the height adjusting bracket, no way to get it out

[amitachin]

What are the part numbers for the 2 washers? My Honda lawnmower is Model #: HRR2162SDA

[robertknight]

Do you know the part number for the wave washer? Model number HRR216K9VKAA

[billypeterson]

how do i go about removing the rear wheels if there seized

[bibekjm]

Didn’t know that the rear wheels are different from the front wheels. I bought a set of four wheels that was advertised as “ lawnmower, wheels” on Amazon and got fooled by it.

[schlenbea]

Idk this narrators voice just makes me mad... Like it's his fault I had to take this mower apart 😂

[eastrockaway]

This replacement part should’ve been identified as defective, their is no way I should be replacing wheels on a mower that’s is 5 years old being used at my residence (Not Commercially) “Class Action Law Suit”