Woodturning a hand sander using my Carbide Chisels

In this video I am making a hand sander using my Carbide Cutters.

Apologies, hope it didn't offend anyone, for the fruity language used. No offence intended.

This video is aimed at new turners using my Carbide Chisels.

To buy any of my tools or cutters visit my website;

Thanks for watching.

Please Note;
These videos are meant for the purposes of entertainment. Any attempt to imitate or copy what I do must be done at your own risk. My practices may not always be correct or the safest for you. I strongly recommend that you find your own way of turning. You are responsible for your own safety while woodworking. Read and understand the operation and safety manuals supplied with your tools and machinery to ensure you are safe while using such equipment.

[katebartolomei]

Thank you - you are brilliant ... beginning wood turner here and on a very limited budget ... you are definitely my guy!!

[stevenbartlett]

That was very informative, a lot of useful information about different tool types, thank you. Lots of wood turner's think everyone is as experienced as they are. I took note on one of your videos about riding the bevel, that made a massive difference for me. So much easier when you use the tool property.

[TpCatTm]

I wish I had found your channel a long time ago; so informative, so many tips... brilliant. Thank you.

[TimPiggott]

Practical tips on a budget! Subscribed! 👍🏻

[alangibb]

Glenn and Liza that was very informative and very useful, you are right these company's are ott with there prices

[iansturnbull]

Make sure you check the shaft size of the sanding pads before ordering the bearings. As I have discovered, not every seller states the shaft size and they are all over the place, from 3mm to 6.5 mm.

[peterhicks]

This is fantastic Glenn, fantastic.

Sooo much better having something you’ve made yourself.

Really reassuring to have someone like yourself, enabling us all to enjoy turning on a budget.

I for one am going to love this project if fact, I wouldn’t mine every single subscriber & visitor makes one of your bowl sanders.

Thank you Glenn

[geofffrisby]

Thank you for talking about the drive centres from RGD Tools.
I bought one 4 prong drive centre a little while ago it was nearly half the price of the full set from RGD.
Many thanks
Geoff

[davidletford]

Thanks for the great video, off to ebay now and order some of those bits.

[kendavidson]

Hi GlenI had lost your contact details I bought three of your carbide tools a couple of years ago just before or soon after you moved I really enjoyed your video and love your sense of humour! I will have a go at the sanding tool I was just about to buy one!
Best wishes
Ken

[jogilbreath]

Thank you for your sharing your knowledge! 😊

[johnjb]

So Glenn, You have a great camera person there.well done for marrying her, much cheaper than paying for a professional 😊 and you've got a chef and maid in the same package too 💗.. Thank you both for such a great tutorial etc Well done TEAM

[trurexlee]

Thanks, looks pretty straight forward and I have all the materials.

[rodrigoshariff]

Great content Glenn. For the life of me I can't understand why you only have 429 subscribers; I hope your channel blows up at some point. Cheers!

[rogerdirkx.]

Glenn, I watched your video on making the hand sanders. I really enjoyed it very much. What a money saving project. Will you please confirm the magnet and bearing sizes and hole sizes needed. I enjoy your channel? Your videos are very well presented. Thanks. Roger D.

[fergusrb]

I am just getting into carbide tools, that is how I found your channel. I understand what you were saying about speed, but is there a minimum speed you should stay above for best results with carbide? I should learn to turn faster. I have really enjoyed your 3 tool series. Stop and start the video to catch the action ha ha. Thanks a lot for the information.

[andredupuis]

Can you make a video how to sharp carbide tools (knife) thanks M.Glen and what is different whit negative angle I like your video every time I can ❤

[halmartin]

Hey Glenn, GREAT video. I made a sander like that about six months ago. I didn't think about using the rare earth magnet I used a drill stop on the top side. Works good just have to use an Allen wrench. The next ones will be with the magnet. I couldn't see spending all the money for a pad on a stick. Also I noticed your carbide cutters appear to be thicker than the Easy wood or Sorby. Are they or does it just look that way? if they are, is there a reason? Thanks for all the good info you provide. I work in a retail store that sells turning tools I pass your video info on to others for them to watch and learn. Thanks keep up the good work.

[christopherharrison]

Glen where do you get your smok’s from I’m new and doing my Mrs head in trying to brush myself down before coming back in the house.

[donjohnson]

I've got the bits necessary to start making some hand sanders, but am undecided what diameter to make the handles. Obviously it is not critical, but I like the way that you have yours handily stored. You appear to use similar plastic tube sections to store your chisels. I would like to copy your systems, although for vastly fewer chisels, but wonder what size pipe you have found to be best for each - or both.