Avoid Heat Loss & Condensation with SuperFOIL Multifoil Insulation

SuperFOIL | Multifoil Insulation SF40

MORE FROM SUPERFOIL:

How Multifoil Insulation Benefits You

The 3-in-1 highly reflective foil serves as a radiant barrier, preventing unnecessary heat gain or loss. The built-in VCL minimises the risks of moisture penetration, condensation, and mould. Additionally, the inbuilt insulated waddings slow down heat transfer and act as an effective insulator.

When installed in continuous layers, multifoil insulation protects your property from heat loss or gain, temperature fluctuation, and condensation, ensuring year-round protection and substantial energy bill savings.

The multi-functional and easy design also simplifies your insulation job, saving you space, time, and money on installation.

@SuperFOIL-Insulation

==========================================
#insulation #homeimprovement #diy

🛒 As an Amazon Associate, we earn from qualifying purchases

◾ Out of respect to our sponsors and followers, we'll remove comments that do not follow expected standards of politeness and decency.

[stephengreen]

Now get the heat lamps in wired to the lamppost just outside, bit of venting, ready for the plants, nice one Roger

[kriskelly]

As a lagger when using the foil tape, put it on a belt or rope at the front of you. Once you get the tape started never rip the backing off, and leave some extra when finished

[nvelsen]

8:34 Rapid heating works. The glues tend to not like high heat levels too much and the tape and paper holder expand at different rates, so you get a bit of friction separation too.

Saw a guy who worked insulation who had a thermal knife set up strapped to a small tool cart and whenever he needed to start a new bit, he simply pushed the tip of the tape into the hot thermal cutter, the layers separated in seconds.

[SuperFOIL-Insulation]

Great to see (and love reading all the positive comments)!

Thanks Roger & the Skill Builder team.

[weekendwarrior]

Yep, you are so right. It's not the qualities of materials alone, but the qualities of the whole installation, that matter.

[alanhodgson]

Trouble is the main stream house builders self regulate on building regs. The standard of house building today is appalling, as everything is done to cost and not standard.

[JoannaLouise]

What a claustrophobic space to work in! The quirky timberwork made it look like a cobbled together tree-house :)

[tuffytoys]

! The Problem with consulting with the Insulation Companies is that they now Hire People with little skill or Knowledge because they want to Pay them very Little and less and less and these "Sales" Associates now call themselves "Experts" and are giving You Advice!

[weekendwarrior]

Roger: "it's been done by a plumber! I know because I'm one."

[pleappleappleap]

You could run corrugated plastic behind the insulation to provide a gap, and run from a ridge vent to a soffit vent.

[feylezofriza]

I insulated my attic this year with about 800 pounds of loosefill cellulose. It was a massively tiresome job for a single man crew. But it was so worth it. It reduced our summer indoor temps by a good 4 degrees F . Now we don't even need AC on most days.

The fact that insulation costs only a small fraction of solar panels, is way more effective in reducing greenhouse emissions per unit cost, and is not half as popular as solar is simply baffling to me. But I guess, you can't brag about something as much if it is not a shiny and expensive new tech toy screwed on top of your house.

[lestercranmer]

With that foil tape with paper backing, have you tried a piece of masking tape on one side, makes it easier to separate, i do vinyl graphics for a living and works for me,

[mrbear]

I installed Superfoil SF60 in my cold air loft over the top of 2 inches of crapped fibreglass installation 3 yrs ago in a day. ! A fundamental change in the warmth of the house, massive reduction in heating BTU needed ! TOP PRODUCT not cheap but payback is 5yrs for me

[johnhaydon]

Fair play to you Roger, nice job there. How many loftys do you go to where there are huge draughts coming out through the light fittings, or under the skirting boards, as you say cutting PIR board into a hipped roof is a challenge. We purposely cut the boards say 1 cm small and then fill all around with squirty foam, it takes time and costs a bit more but the difference is like night and day.
To do a really good insulation job does add a few quid and you need an understanding customer to accept that, cheaper to heat for life though!

[eddjordan]

love that stuff did a big job with it warm roof with it on the outside linked into the cavity then 100mm rockwool inbetween the rafters and another layer on the skeiling down onto the dwarf wall,

ps

use a straight edge stand on it and stanley to cut it much easier than scissors

[RPBCACUEAIIBH]

8:33 Try using the tip of a knife, or scissors for that. I always use something sharp for that if I can.

[mickthurston]

Very informative. Didn't appreciate the dig against plumbers. With the tape just start the peel process. But don't take it to the line leave some discard backing paper. Mick London

[tlaw]

How best to refurbish 1960s residential balconies? They are usually concret floor and asphalt finish usually. How do we refurbish it to reduce cold bridging with insulation; and have some waterproofing membrane finish?

[peterroberts]

We Installed a multifoil installation with a breathable membrane built in to the product.

We lined all the internal faces of our external facing double brick 100yr old property walls.

It is brilliant stuff and has been really worth the effort !

[YvetteWilliams-dxkk]

I have learned so much from these videos thanks !