How To Build A Shed - Part 8 - Exterior Trim Install

For Shed Plans to this and other sheds please visit our website at

WARNING: These projects can be dangerous, posing risks of personal injury, or property damage, and in some cases, death. There may be the possibly other risks of which I am not fully aware. Use of video content and or website information is at your own risk.

[davidusa]

This video series has been HUGE for me. Not sure I could have gotten as far as I have without these.

[kingofbytes]

I'm building my kids treehouse and needed some pointers as I'm not a tradesman. Your videos are excellent - you show all the 'gotchas' and explain it with great videography and no bs that is found on so many other videos. Thanks so much. Subscribed!

[chileboys]

Noticed that you are wearing a shirt with the Hawaiian islands cool. Really cool and well explained videos, thumbs up.

[MDTAR]

It seems like every time i get on YouTube to find an instructional video...i end up watching yours. Nice job guys!

[davidf]

Thanks for the help. Really appreciate it.

[ronh]

Nice video series! What size/length nails did you use in the nail gun on the siding and trim?
Thanks for your time.
Ron

[robbyvenetian]

Cool video! Did you use OSB for the fascia? is it 1/2 thick? Thank you.

[jasonostler]

Thanks for the video series, they have been very helpful. Are those Utah mountains?

[multipulti]

Hello! What is the material that you are embroidering the structure? Thanks in advance for your reply!

[radioguy]

I thought this was very well done, on my shed I am going to fit each piece then paint all sides and edges before installation to prevent rot . or at least slow it down.

[michaelroso]

Two questions. One, is the fascia board you used a composite wood or all wood? Two, what type of metal piece did you put between the siding on the gable ends?

[beto]

Hey i have a question, does it need to have a trim piece at the bottom of the shed? Like at the bottom edge of the shed all around it. Ive seem some bigger structures that have it and some that dont. Is it optional or what? Does water get in between the trim piece?

[jaguar]

Can you link a site where we can shop for that type of corner trim ?...thx.

[sarahhambidge]

where does he live, the mountains are beautiful here

[pookie]

Do you have anything showing vinyl siding installation?

[tpikew]

So how wide of a piece of trim are you cutting from that t11

[ClausRow]

I can't find the right dimensions for the smart side trim near me. All I can find is 1x6x8. Is it ok if I use other wood for the trim? The smart side is cheaper but unfortunately they only have that length. Or could I buy the smartside and then cut it to the right width and then add 2 inches to with some scrap? Any thoughts =)?

[marcuswalker]

How much did the whole project costs?? And what's the size of the shed

[WinstonJordan]

How long did this take you to complete? Man hours? A weekend?

[usarmymike]

HELP ME please!!!. I purchased a 30L travel trailer. I am redoing the roof and found out everything has been framed with 2x2 pieces. My goal was to build a pitched gable above the RV so I could have a loft inside. I was going to be using 2x6 can anyone give me recommendations on if I'm able to use 2x4 or 2x6 as my rafter since the wall framing is only 2x2. Idk what to do please help