Fix it Yourself! Windshield Washer Stopped Spraying

Learn how to diagnose, troubleshoot, and replace the windshield washer pump on a 2004 Toyota Sienna. Is the washer spray not working on your vehicle? Water or fluid not spraying onto your windshield? Follow along and learn how to check the washer fluid, fuse, and if needed, replace the washer pump in this video.
@HacksbyDad

Disclaimer:
This video description contains affiliate links. That means if you make a purchase or sign up for a service after clicking one of my links I may receive a commission, at no extra cost to you. As an Amazon Associate, I earn from qualifying purchases.
Thank you for supporting my channel!

This video is for entertainment purposes only. Rely on the information in this video at your own risk.

[shanehiggins]

Perfect description video. Very well done sir. You just saved me a bunch of time and money

[allenkatz]

First of all- thanks so much!

The replacement was easier than expected. My only issue was when I was removing the old one the grommet came out with it and I tried installing the new one without removing the grommet from the pump and putting it in first. It didn’t work. Finally I realized that the grommet needs to be removed from the pump and installed on the reservoir before installing the pump.

The other thing I wanted to point out is that when I took out the old one it looked brand new and I was wondering if something else was the issue. I tested the resistance on both with a multimeter set to 200 ohms and the new one read 5.5 while the old one read 1.5. That showed me that there was something wrong with the pump.

[warsamewarsame]

Thank you for the video. I got the same problem on my 2015 Sienna. Your video helped me to diagnose and change the pump. 🙏

[sdean]

Very helpful and easy to follow video ! Well done and thanks for posting.

[LOSTTEMPLAR]

Very good video. Very detailed and straight to the point. Thank you.

[kathyadams]

Great instructions!! I like your checklist before digging in, down to the lighting to check the fuse. I watched this even though I’m working on my mom’s car 2007 corolla. Nice video

[MARCELOOLIVEIRA-lggv]

very clear explain and you got 5 stars the video direct to the problem !!

[justalex]

Hello, Back side working but only front not working.

[waltergleason]

Nice to know I have a front and a rear pump, the back one is broke!

[Deanthy]

So I replaced my pump with a brand new one and it makes noise like it is trying to work. I then checked to see if the hose was clogged by plugging it into the back pump and it sprays. I then checked my fuse and it is fine. Do you think you might know what is wrong with it? I have run out of ideas

[georgesalas]

2008 Ford ranger fuse venture wiper spray

[Groveherooffcial]

I checked the fuse it was burnt for the washer changed it and still didn’t work I’m guessing it’s the pump now

[helpontheway]

Tip: when low try not to use wipers. Those little guys burn quick and most fail if they run without a drop