Tesla Turbine Before Then After - how much surface area is too much?

Tesla Turbine Actual Power Output Test - 1200 Watt Real Electrical Load - Turbo Jet Prototyping (sweet and simple version)
Renewable energy w/ Tesla turbines - energy independence off-grid

If you would like to become a monthly donor to help further my Tesla Turbine Alternative Energy Research please become a monthly member of my patreon community. Thank you!

#NikolaTesla​​ #TeslaTurbine​ #TesTurEnergy #solarpower #SteamTurbine #SolarSteam #SolarTurbine #renewableenergy #greenenergy

Check out my latest updates. Here’s my latest 10in diameter, 75disc aluminum and plastic prototype drive turbine dyno, 2.75kW and 6.22ft-lbs of torque to the shaft at only 4150rpm with a 150psi room temp comp air supply from a regular piston compressor for now. I’m gearing it UP AT 1:3.6 to dual BLDC gens with a Kv rating of 2200rpm/volt. So for every 611 RPMs on the turbine the generators output 1volt.

Tesla Turbine Generators With Usable Power and Torque

1200watt continuous electrical load output with room temp compressed air all the way down to 65 psi too and with the turbine only at about 6700rpm.

This is a look through of the 10in disc stack of 75 discs, +10,000in^2

These are the latest liquid fuel burner tests for the replication of GB 186,083.

These are the latest propane burner tests.
Tesla Turbine Jet Engine Combustion System GB 186,083 Superheated Steam

I haven’t gotten to my Tesla disc compressor tests finalized just yet but I have the setup to do them already just gotta do some upgrades to my bearing and gear hubs for the generators.
10in Tesla Compressor w/ Dual 6s BLDCs

Turbin Tesla Tesla Turbin turbin de Tesla turbin tesla turbina tesla tesla turbine steam turbina steam turbin steam turbine

[carpediemarts]

Nearly 30 years of following the Tesla turbine idea, and Ive never heard of one actually doing anything useful other than spinning on s table.

[Dipplers]

I like how you used brushless rc motors as the generators

[liztippetts]

what are you using to cut all the plates? And how are you making the enclosure? Trying to make this myself

[UrbanLegends-Unleashed]

ok riddle me this (use the turbine with liquid nitrogen @space absolute zero vaccume sealed ) would it be possible to create oxygen as well as propulsion?

[Seriouslydave]

Why are the discs. Vertical? And only one insource?

[thelaggygamer]

Can i buy some of these disks? i dont know a cnc shop where im at.

[nickoutram]

punch some dimples into the each disk to keep them fractionally apart

[Ghanzo]

Theyre going to flex and bend which will slow it down. Harder and stiffer is better.

[driverjamescopeland]

Material is too flexible. You're losing efficiency with closed gaps.

[TheSmbTechy]

Where can that aluminum be sourced online?

[ronmartin]

I'll donate $1.42 to see you fill this to the cap with soda pop and run it up to just 3k

[futuresight]

So nice en thin this discs are, love to see this baby connected to the combustion system to make it complete, in car factory's thay call it ( the marriage)

[GenericName]

Where's the steam? Explain yourself

[BibboRacing]

These discs are going to stick to each other

[ronmartin]

Now, don't run this one backwards

[XroorX]

Use discs from a disc drive. Those are machines to higher specs than anything Elon makes