How to Setup and Use the ILS Command from CHAUVET DJ

Now the ILS universe is at your command with ILS Command, a powerful controller capable of programing any ILS-enabled product. The Integrated Lighting System makes creating a synchronized light show across different fixture types fast and easy without DMX. This hardware controller has a built-in D-Fi transmitter that wirelessly controls an unlimited number of ILS-enabled fixtures. Enjoy unlimited creativity as you customize, save and recall presets even in dark environments where backlit silicon buttons provide a tactile response and bright visibility. Whether you’re a mobile DJ, work in entertainment lighting, or need to create the perfect ambiance for a bar, get to the good times sooner with ILS Command.

CHAUVET DJ Online:

#chauvetdj #ils #entertainmentlighting

[georgethedj]

I notice that the Ils gig bar moving heads are the same color and gobos in AUTO mode as long as the pars or Derby’s are on and both movers match. But, the movers are different colors and gobos and do not match each other in sound mode. Any one notice this as well.

[elegancequartet]

How do I select which moving head to use for Follow Spot? Currently when I press and hold the follow spot button both moving heads just stop rotating and turn off. Even if I set the X Y points and save I still can't get any of them to turn on or move as a spotlight.

[RafaelUnplugged]

When I press and hold follow spot - neither of my lights react. How do I choose the fixture?

[pizzamike]

Will this controller work with gigbar 2?

[pedrovillegasradio]

I need help y put the botton Follow Spot and the spot not respond

[djvlee]

How do you select the moving head for follow spot ?

[Fabio-rtxk]

I recently got the ILS Command. Basically I'm almost satisfied. If I have the Sound to Light mode active, the moving heads change extremely quickly. Way too nervous. This was also the case with the Gigbar (controlled without ILS Command) before the update. Great after the update. Now to my question: is there an update for the ILS Command so that the gobos change is slower? If so, how can I update the ILS Command? I currently have version v.14 on the ILS Command and on the Gigbar V2.06 Thank you for your feedback signal.

[radiodjs]

Why is the power cord so short? It's 19" long! I can't even get that to an outlet. I'll have to run an extension cord to it!!

[maxjames]

Just got my Command. I’m struggling to get the follow spot function to work. When I hold go into the setting, none of the moving heads react. (Using 2 gigbar moves with ILS)

Any help would be appreciated.

[andrewwheatcroft]

Can you use the DMX wired for lights that aren’t compatible with the wireless

[DanFallonMusic]

How do you use this controller with the Gigbar move (no ILS)

[vjyoukai]

I'm getting a Second GIGBAR Move with Ils.. Can I control both GIGBAR using one Ils command without setting one GIGBAR to master and the other as slave.

[dhd]

Can I use this to run other lights ? By connecting them to a Chauvet wireless and running an dmx cable to the lights?

[CableRayquaza]

I have a gig bar 2. Just the 2 pars, 2 derby, and the lasers/strobes. Is this compatible with this controller?

[sectionsam]

How many gig bars can you use on an ILS command

[RyanGrantOfficial]

How do you control the second moving head follow spot I can only do one for some reason

[joeleonard]

I did everything and i can not get the gig bar move +ils to connect wireless. If i connect it through the dmx cable everything works.

[djMotivation]

Does this work with the gigbar move?
The gigbar Without +ils?

[karMyloPonderosa]

Does this work for wash fx2 ?! Im so sixk od using dmx peogram

[djjerryg_soundexpressenter]

Also, what is the recommended DFI channel setting?