Mikrotik VLANs - CRS1xx & CRS2xx - Mikrotik Tutorial

Learn to configure VLANS on Mikrotik CSR3XX step by step.

This process applies only to switches from the families CRS1xx and CRS2xx. If you wan to configure a CRS3xx please follow the following procedure:

#MikrotikTutorial #MikrotikVLANs #ConfigureVLANsMikrotik

EXAMPLE: CONFIGURATION ON S-2

STEP 1
/interface bridge
add name=bridge
STEP 2
/interface bridge port
add bridge=bridge interface=sfp1
add bridge=bridge interface=sfp2
add bridge=bridge interface=sfp3

STEP 3
/interface ethernet switch ingress-vlan-translation
add customer-vid=0 new-customer-vid=20 ports=sfp2,sfp3

STEP 4
/interface ethernet switch egress-vlan-tag
add tagged-ports=sfp1 vlan-id=20
add tagged-ports=switch1-cpu,sfp1 vlan-id=99

STEP 5
/interface vlan
add interface=bridge name=vlan-99 vlan-id=99
/ip address
add address=172.16.99.3/24 interface=vlan-99 network=172.16.99.0
/ip route
add distance=1 gateway=172.16.99.1

STEP 6
/interface ethernet switch vlan
add ports=sfp2,sfp1,sfp3 vlan-id=20
add ports=switch1-cpu,sfp1 vlan-id=99

STEP 7
/interface ethernet switch
set drop-if-invalid-or-src-port-not-member-of-vlan-on-ports=sfp1,sfp2,sfp3

[TheNetworkTrip]

Do you have any CRS1xx or CRS2xx in your topology?

[milohoffman]

This is the BEST explanation I have found. Good job.

[craig]

Thank you for making these videos! Very helpful and you are great at explaining things in a logical step by step manor.

[shokowillard]

By far the best Mikrotik VLAN configuration video. Please may also do a tutorial of capsman and vlans. Keep up the good work

[jmwest]

You're a big one MikroTik-guy!! I follow you from Germany. Another please

[ocheretnyi]

Отличное видео, хороший мануал по настройке CRS 1XX. На русскоязычной части толкового ничего нет по этим моделям, все копируют инфу друг с друга, не вдаваясь в детали

[mrdaniellemke]

Thanks for the video, this really cut through the noise for me.

[MykolaTheVaultDweller]

Oh my God THANK YOY!!!! MANY THANKS FROM YOU SAVED MY CRS210

[progotimultimedia]

Very helpful and I have completed my configuration

[RavingMad]

Thanks for this video. I've followed this exactly then added some of my creativity to have an awesome performing router switch combo. However I'm not sure how to associate the WLAN radio SSIDs on my crs109 switch to the VLANs. Tutorials I found talk about doing it in bridge with bridge VLAN filtering. But it's not how you did the VLANs for crs212, which I followed for crs109. Any suggestions would be much appreciated. Thanks again.

[qammars]

Great Video, cleared alot of issues we were facing. One thing want to know that if in case we have to use it as a Access Switch only then what kind of settings we may need? Do we need to add all the ports to the Ing-Vlan as well ?

[slavisadisk]

Hello, thank you for this, it works good. I cant find tutorial to add wireless wlan1 in separate VLAN (without ethernet access port in same vlan). Some forum mention making VirtualAP and bridging with eth-trunk, but that bridge could not be added to Switch/VLAN table. So it could not be propagated further through trunk port...

[zeljkomikrotik]

Great learning process! Thank you! For my config i would need to pass on the first CRS112 where you have two vlans also mgmt vlan in order to connect two AP's with two SSID: in your case IT and Marketing. Lets say i would need to have them on sfp7 and sfp8. What additional setup do i need to add to your config? Tx

[nikolashuminosky]

also can we use as a CRS1xx & CRS2xx hybrid vlans?

[Luke-jvoh]

HI Wilmer, iis it possible set " all in one" on CRS 1xxx ? I mean router + switch ( with few vlan's ?) I try do this but without good results.. btw very good video !!!

[RedWollip]

I have a MIKROTIK RB3011 and two Mikrotik CSS326-24G-2S-RM switches. I would be very interested to discover the proper method of configuration of The Router with 5 VLANS on a trunk to SW1 and 5 VLANS to SW2. It is a setup similar to yours but with a much different set of switches. Would you be open to creating a video to do this?

[akant]

I have a CRS125 (v6.49) and I am able to configure vlans the sameway you do on a CRS3xx .... what makes this method different? I assume I have no hardware offload with a CRS125 since I am using vlans...

[MindSparqTrivia]

Great sir. . may I request english tutorial also on vlans + ospf sir. Thank you

[nikolashuminosky]

please do mere video using vlan with switch cheap + QoS

[CiscoNetX-YT]

Donde puedo encontrar las imagen que utilizo en el video