Not GETTING any WATER From Your RO? Do this! #shorts

You have a reverse Osmosis Drinking water system AND you want great tasting super pure drinking water for your family. BUT all of a sudden, you are getting almost no water! Check this out!
1) Shut off the water going to your RO system.

3) Open up the tank shut off into a sink. If the tank is heavy (full of water) add some air to the shrader valve to push the water out.

5) Reconnect the tank

6) Allow system 2-3 hours to refill with water

Comment and tell me what you like most about your RO water.

LOVE GARY THE WATER GUY AND WANT TO LEARN MORE ABOUT WATER FILTRATION FOR YOUR FAMILY? HERE ARE SOME NEXT STEPS!

2) LET’S CONNECT!

3) CONTACT!

4) SHOP!

Please comment or ask questions below.
#waterestore#garythewaterguy#reverseosmosis

[missouriupser]

Thank YOU Thank YOU! I was looking at ordering a new tank because I emailed the company and they told me I probably needed a new tank in that the bladder was bad. They said nothing about recharging the tank! You saved me $$!!! Thank YOU for your video on recharging the tank!

[dazkid]

First, I wanna thank you on behalf on anyone coming across this video for your assistance with anyone's issues. Troubleshooting and assistance for RO systems seems to be lacking across the internet, so it's wonderful for you to provide what assistance you can.

Perhaps I might pick at your brain, then? I'm struggling with a system that is refusing to fill its tank. I've already confirmed my house water pressure is at 60 PSI, and have noticed that water IS making it to all three stages. Water is also making it to the tank hose, and my tank is, when empty, sitting at a bladder pressure of 7 PSI. This is actually my second tank, since I thought it was a problem with the first. My sink's pressure is fine, as well. I'm at a complete loss, and worry I might have to get a brand new system. Even then, I'm not sure a new system will fix my issue.

[vinceleonguerrero]

Thank you for this informative short. I am experiencing this very problem. I will perform the steps and pray the tank is not waterlogged.

[d.n.]

Thank you so much for this video!!! You’re awesome

[signedelacroix]

When you sanatize the system, do you open or close the tank valve? Many say yes, but my system instruction say no. It's a 5 filters. Thanks again for your nice videos.

[piyushjadhav]

Hi sir, my reverse9smosis uv filter is getting choked with dirt again and again because of low pressure.
The serviceman saying you need to pur hase a pump worth Rs 2000/- It's been only 10 months from purchasing it. He had already changed 1 internal and 1 external candle.

Should i go with 2000 decision

[davidchapman]

My question is I have a 20 year old ro spiggot. It has 3 hoses connected but all new ones only have 1 connection. I am confused. I do have 2 tanks connected.

[drennankayser]

The hose that you disconnect in this video, when you turn in the RO system how much water should come out of that hose that hooks up to the tank?

[estrellaandnicole]

HI,
I moved to this new home where the old owner purchase the RO under my sink. the water is coming very strong and first then it takes forever to get a water cup. Please I need support: I am buying a PSI to pressure the gate. I need support with this area... I have been living here for over a year now so I know i have to replace the water filters: the pre settlement and the carbon canisters . How do I know what kind of water filters I need to buy? mine look identifcal to your video the only replacements I have from previous owners is a " omipure K2533 JJ and I just replaced that. I did what you told me to do in your video and no water came out from the down hole only water from the top. But I do not have a PSI meter so I am buying it. To make sure i have a 7 psi. Do i suppouse to keep putting air on the bottom hole until all water from the top stops coming out, I stopped and plugged it in but still water comes out very slow on the top skin. please help me

[vnnghia]

I did the same thing but no water coming out from the faucet. How to check if the tank is empty or not? What is the max psi can I pump to the tank? I stop at 7psi and no water coming out. I turn on the cold water valve and wait the entire night for the tank to be filled up but I only get 1 litter of water in the next morning…can you suggest what i need to do? Thank you

[Rmilms]

My tank was still full, i used a compressor for a little bit and it started the flow until tank emptied

[SpoilrAlrt]

What am I to do if no water is coming out of the faucet that is connected to the water filtration system?

[jmugen]

Thank you for taking the time to make this post.

[abbasa]

Im having a problem with my system. Its installed in the basement with the main tank a few months ago. I added a second tank recently like you suggested under the kitchen sink and the pressure was amazing. but now its weakened and the upstairs tank isnt really filling up. Both tanks have 8 psi. What gives?

[thomassaook]

Hello
In My system the motor does not stop, but when i close the valve of the tank, the motor stops, what could be the problem, when i re-open the tank valve, the motor restarts and stay running like for ever

[rxspect]

Hey my tank for my DuPont reverse osmosis system says 100 psi pressure, what should I fill it to?

[fadethenoise]

DO NOT USE A COMPRESSOR. You can blow the bladder. Use a bicycle tire pump.

[aaronbaraiya]

I just replaced the filters on the RO system. It now has low flow, should I wait a little longer before trying to repressurise it? It has only been 15 minutes since I changed the filters.

[mindyallan]

Hey Gary,

We just installed a brand new Waterite V360. we have no water coming out of our system. there is no water getting to the tank. it seems to be stuck in the filters. filters are brand new. plumbing is brad new. great water pressure in the rest of the house. any ideas? we have removed all hoses from the filter system and have a straight open pipe to a bucket for troubleshootng purposes.

[j.t.thomas]

Do all tanks have an air valve? Mine does not