FIXED Broken Gimbal After Crush Hard DJI Mini 3 Pro

DJI Mini 3 Pro is easily Brake the Gimbal When Crashing. You no need to change the whole gimbal because Mini 3 and mini 3 pro is easy to repair the gimbal. Change what you think is broken.

Cheap Aliexpress Link:

Feel Free to Contact Us for more Information about Remotely Fix 40011 and 40021 for all Mini and Air Models.
Whatsapp : [phone]

[cinq_]

Thanks for this quick video without spoken words. I risked it and successfully fixed my gimbal. Small tip for the other people’s who want to try: if you have the dumping cushions without the rubber extansions you should order a pair. It was impossible for me to replace the cushions. The new pair had extansions like in this video.
Other tip: you should replace the little lid (6:25) as early as possible before replace the camera at the gimbal.

[fuadhirmas]

Motors have rotation limits, how do you know how to put rubber suspension back in the right holes?
Regards.

[mischasolaris]

Thank you for the great videos you do! Do you experience in this : I also have an error 1d010002 after a crash. Replaced cable, replaced motors. Upon startup, I can feel the motors are doing some tension, but releasing later. Video is there. All Axis are easy to move. In-App calibration failed, DJI Assistant calibration goes through but does not help.

[alexandrugaspar]

hello, I have a question, I went into a tree with the drone, the tire came off, I changed it on one side, I didn't change it on the side with the cable, the problem is as follows, now when I fly I have a jelly effect on the video, could it be the same how did you change the change piece in this clip? I would like to mention that the controller does not indicate that there is anything wrong... but in fact the part between the camera and the support is somewhat out of place

[KoloRa]

best service, no questions about that. Thank you!

[EngineersAcademy]

Hello there ! I am Not able to Connect my RC & Aircraft on Mini 2, Kindly help

[pdxdiyer]

Thanks for the great videos - they are really helpful! Questions - do all the gimbal motors always move during the power up checks or if one is not moving freely does it not try the next motor? Do you have a video showing what is supposed to happen when the Mini3 Pro does its power up gimbal self check? Thanks!

[alexandraacreator-art]

Hi, great video! I can't reach Aliexpress to buy gimbal from Sweden. Do you have any other online shop suggestion with suitable parts?

[danicavalencia]

Hi, have you tried fixing gimbal overload error? My drone’s camera is shaky and I guess it was because of that error. I tried calibrating the gimbal but the error still persists after many tries of flying my drone. Any advice will be appreciated.

[absolutewandererpankyy]

Can you repair Dji air 3 gimbal? If yes please tell the pricing & everything for this

[drone]

Preciso de um reparo no guimbal di mini 3pro. Vc far? Sou di Brasil

[rayfushagood]

I fixed, but the camera still wont rotate up or down. Do i have the manual recalibrate it?

[Izzy.rtr.]

Hola como estás
Quiero comprar una cámara nueva para mi dji mini 3 pro

[WesleyCavegn]

Hello, I crashed my drone and need your help. How can I contact you?

[dreamstep]

I am from India, My DJI mini 3 pro drone crashed no power coming to the drone since the crash. Camera gimbal is broken...Why is the power not coming? Will it cost a lot to repair the gimbal? Do you have to change everything? Plz sir give me your suggestions...

[guillaume]

Hey, I have Error 40003, and can't go through the calibration process. Seems stuck around 85%, and tells me it can not calibrate, try again. Any guess?
Thank you

[BlackEight-tf]

Hi, any tips on how to not break gimbal rubber when assembling? I cannot place/shoot it without breaking it.

[squatro]

Help! I have gimbal stuck error Error Codde 1D010002 how to fix please???

[lemac]

I have gimbal error 40027 how to fix please

[nighthd]

On my controller it says gimbal stuck and the camera itself does not work. It just a black screen.