Let's Build A Vision Enclosure

In this video we go over the entire print and assembly process for the vision enclosure for the Bambu labs P1P.

Material list:
2 M3x16 hex bolts / socket head
4 M3x12 hex bolts / socket head
4 M3x8 hex bolts / socket heads
20 M3x6mm hex bolts / socket head
12 M3x8mm flat head
A Bunch of M3 heated inserts
10 6x3mm magnets
1kg spool for all printed components
Sheets of acrylic / plexiglass
Soldering iron

[haddonist]

Thanks for the walkthrough. For future videos please make the music the same volume as the talking - this one has it way too loud.

[RenGaSenpaiChannel]

Hi :) Having some issues printing the rear piece (that in your plate 2) for my Vision Enclosure. Do you print at full speed or did you decrease it a little bit? When I try to print it I have always the same issue: during printing, it seems as if the filament can't keep up with the speed of the print head. The filament doesn't lay down properly and remains detached. These curled pieces of filament then end up among the various layers, causing a tremendous mess. Hope you can help me :)

[SportsShorts]

I went looking for videos showing the parts of this process that were difficult and/or not easily understood. For example: the polycarbonate cutting and measuring, the heated inserts, the magnets, the side plates and how they’re put together and installed.

You skipped over all of the not readily apparent aspects, making this video only marginally helpful.