How to install metal roofing Skyline Metal Roofing Installation Video by ASC Building Products

Skyline metal roofing has long been a choice of roofers, contractors and “Do-it-Yourselfers” and is the perfect choice for new residential construction or remodels as well as commercial projects.

CORRECTION: at 3:09 mark we say “for increased weathertightness install neoprene closures below the panel turn up”. This is Incorrect! – No closures with vented ridge!

[edbreyette]

😂 the effort put into this video lends it credibility it really doesn’t deserve. The ends of the panels get hemmed and hooked to the correct drip edge for the panels, drip edge also isn’t correct. Come on guys, a homeowner might make me do something like this to their home after watching something like this.

[yulyanarias]

This is the most informative well made video for roof installation I have ever seen.

[RyanJohnsonD]

Very clear instructional examples. The 3D work and narrator made it really clear.

[JoeBribem]

Grace Ice and Water is your best friend here and precision sealant application on the uphill sides of the roof penetrations where you slip the flashing under the roofing. I have this system in Ketchikan, Alaska and it's a great install. Get the right contractor.

[lost_ducks]

ALL info videos need to be presented so well..TY TY . WATCHING EM FOR LONG TIME..BEST FIND. I GET IT..EASY TO FOLLOW SIMPLE AND CLEAR other build videos available ?

[redskiclayton]

WOW, very informative, can pretty much use most of these techniques on any type of metal roofing.
Thank you ASC

[mischafellner]

This is a great roofing product. Installed it many times. It’s great.

[phutsangtao-iQ]

roofing instructions for the house, detailed standards, I thank you for your guidance

[beardedroofer]

I'm not judging, but you're putting holes through your metal to attach it to the roof. Not only that, but the panels snap together like a model kit. It looks good in a computer program or on new construction, but reality is alittle different, especially with a rip/replace job. I recommend 24g 1" drip edge, 21" wide double lock standing seam with wrapped corners, rake edge and eaves. It comes in a variety of colors and metal, from galvalume to copper, zinc to steel. In the end, everything wraps itself with nothing exposed. It even eliminates the need for reverse flashing for walls, skylights, chimneys, etc.

[davidherron]

I think everything is right on with this video..there is alot of sealant on ever peice installed pretty good video.

[OggyBleacher]

The order of operation is a little off in this video. At 3:30 they jump into the vented ridge cap...but at 4:50 it demonstrates the gable end flashing, which must be done BEFORE the ridge cap. The zee closure goes on before the gable flashing because the gable end is cut to accommodate the zee closure at 5:08. But the ridge itself is positioned OVER the gable flashing.

[SWARREN]

This channel deserves a lot of subscribers

[roberthigbee]

Very nice video. I don't like your chimney flashing. Old school method is to cut into the mortar between the chimney bricks to achieve a diagonal zig-zag mortar notch. Then you fold the flashing into the cut channel and seal. Sometimes they just cut a diagonal straight line across the bricks, which is better than what you show in your video, but this can cause a stress concentration that could cause brick cracking. In your method, as the metal along the chimney vertical flashing seasonally expands and contracts, the caulk with work loose from the chimney brick and water will leak in. I am also nervous about all of edge screws you apply through the metal roof. A more thorough design hides 100% of all screws so that there are zero screws exposed to the rain, even if rubber washers are installed under each screw, the rubber will decompose.

[waltermatthewberg]

You can still see the underlayment from the notches cut above the chimney and skylights. Are those holes suppose to allow water in for job security?

[cesarfigueroa]

Todo lindo con videitos y dibujitos...

[dorgothbottomwipe]

I watch this video on repeat to help me fall asleep.

[tudo]

Thanhks thanhks bạn. Thật sự tuyệt vời

[covecarpentry]

How do the 2" notches above the skylight in the last video not leak?

[calvinglomstad]

Oggy Bleacher
To be honest I built a garage eyebrow which is just a 2 ft overhang above my doors so did not have to do any ridge venting. Just worked flashing under siding. Good luck on your project.

[manuelaguiniga]

Very good product, but shouldn't the ridge cap be sealed at end. The folding of materials and seating on top with no overlap seams to be a place to infiltration during rain/wind (5.25 min/video)?