3D Printer Calibration on Pronterface.

Disclamer: There are different ways to do a printer calibration. This is only one way that works for my specific printer. It might not work for others.

[srobotics]

I'm working in a better version of this video. I will make a simple program with just a few buttons to simplify calibration and will do my best to specify what printers work with it. I'll try to make it compatible with most. If you have any questions or need help, feel free to comment and I'll do my best to help!

[abpccpba]

Very nice presentation; learned a lot. :-)

[Camusdemerac]

Dude you need a images or video of your printer too we cannot imagine what the printer is doing if we can´t see it best regards.

[Gouldeyecandy]

Hello! I just added an E3V6 hotend to my monoprice mini V1, and I updated the firmware. Now I am trying to run a couple of commands to my Monoprice from Pronterface, but, I am having a REAL hard time finding the Com port, and I cannot connect. I have tried both on my Mac, but, also on a PC laptop running Windows 8.1. When I launch Pronterface on the Mac and the PC, the Port window is blank (on both), and I just have no idea how to find the information to type in.. I had thought I found it at times, but, so far, no luck. Any chance you can help guide me to find the right port that I plug the USB into to my monoprice? I know the ports all work on the Mac and the PC. THANKS!!!

[anthonymartin]

So maybe after a few years its now M303? cus G29 comes up unknown, now after calibration it puts me in an "echo:busy: paused for user" from which i cant save, heat up, or move anything. unless i disconnect, reconnect the printer

[marziantulabot]

Awesome video. Where can I download pronterface? The windows binaries link are not working..

[angrygreek]

I'm still completely lost after watching this.

All I want to do is make the printer save a default Z offset of 0.2mm because I used a 0.2mm feeler gauge, plus the bed leveling knobs to get it at a good height all around the bed.

But no matter when when I go to print a file the Z offset seems to be all over the place.

I did M502, moved Z up 0.2mm, did M500 to save. M502 to load. Hit Home, but the printer still just shows Z: 0 after going home. Shouldn't it show an offset of 0.2mm???

[shelby]

Need help when open pronterface and connect to 3d printer the settings scroll infefintely and printer doesnt respond to jog commands...workked fine earlier todsy

[arletpaz]

when i send commands it says sending : but no

the left interface works great.

[MagicOfRana]

all its work correct but m5o2 comand just say sending and nothing more

i have and voxelab aquila