GE Microwave 'Typical' Problem & Repair when it Doesn't Work

This would be a typical problem and repair of GE microwaves that no longer function, and likely trips/tripped your electrical breaker.

Complete repair fuse and micro switch kit:

* Buy this kit because this is like my 4th time fixing this nuisance microwave Chinese junk, so you'll be stocked and ready.. 💪🏼

Tip Me Here:
Cash App: $ALCOHTRAZ

[epickai]

Thank you. I really appreciate people for posting how to videos. It has saved me a ton of money. I wish you good fortune in all that you do!

[GodBlessTheChild]

Yes I did replace that switch because of the EXACT problem. What ended up happening is it blew AGAIN. Which means there is another issue or I bought a less superior switch. The replacement lasted one day. I'm going to look at the specs on the replacement I used to see if it is still that switch.
“Thank You!” for sharing this.

[TamiCapasso-hsze]

Our GE microwave went completely out this a.m...watched your video, found the switch and fuse and got it working by noon...Thank you!!

[kumarpercy]

This worked perfectly. I took the opportunity to remove the cooking grease around the switches. Thank you especially for telling us how to remove the front panel..

[leonisa]

Thank you so much! My GE microwave died after a couple years and won’t turn on at all. Will give this a try! Wish me luck!

[johnkaiser]

Cannot use a 32v 20 amp auto parts fuse, need 250v, 20 amp microwave appliance shielded fuse (Ace Hardware). Read the description on the old fuse.

[BuenitaAngel]

Thank you for this video! My
Parents almost bought a brand new microwave. We followed your video and fixed the problem!

[bradroth]

Thanks for the clear instructions for disassembling. I found a total of three switches associated with the door. I was able to tweak the door alignment and switch assembly screw so door light now turnes off and unit now starts.

[gregwein]

Thanks so much! I thought it was my capacitor of transformer - both are not available for public purchase. You have given me me hope to avoid a $400 repair bill! Thanks again!

[onefastbob]

BAD ADVICE !! The fuses used in microwave ovens are not the same as automotive fuses. They are a special delay fuses or thermal fuses and readily available. Not a good idea to use a plain old glass AGC fuse. Microwave fuses are usually available at Ace Hardware or other similar stores. Also, our GE over the range microwave oven is 20 years old and still going strong.

[jremy]

This fixed my microwave Thank you so much these kind of videos are saving people money and saving the planet from throwaway culture filling the land fills

[BobJohnsonETech]

We don’t have a fuse issue, but the switch looks like a likely cause. Sometime we have to open and close the door, or wiggle the handle and it starts to work. Thanks for the tips

[slapthelip]

You saved me a lot of time, this was exactly what my issue was. Thanks a lot brother

[MaurieLattimore]

Great info - you saved us over $300 just by changing the fuse!!! Thank you so much!

[jimheatherton]

Everything thing you said was right. I have this exact model it’s 3 ish years old. I ordered parts today it’s either going to go or blow. Thanks Man!!!

[jamescollier]

Please be aware that some of the door switches are normally open and some normally closed, if you do order them. I ended up shimming with paper next to each switch. I then put a small amount of glue there so they can't wiggle. Once they were all solidly in place it worked fine. I had to temporarily take out the plastic part the switches were held, to glue them in. A volt meter and a GF helps to test opening and closing the door. I also used nail polish to build back up where the middle switch wore down some.

[alaingodbout]

Thank you, You saved our popcorn for Movie Night.

[cherylfelling]

Thank you so much! I was bummed when I thought I needed to replace mine! You are so awesome to post this!

[Hwolney]

Juat fixed my GE microwave. Thank you for posting this. Very straightforward repair.

[virnan]

My GE profile microwave is 16 years old and it quit 1 week ago. I will try this solution, thanks