Bambu Lab A1 Running Calibration Tests

The New Bambu Lab A1 Running its Built in Calibration Tests for vibration compensation, motor noise and auto bed leveling and z offset. This process usually takes about 20 minutes to complete and once its done, you're ready to start printing! Before you dive right in though, be sure to inspect the Heat Bed Cable and ensure there are no visible abnormalities where the cable connects to the main body of the printer. Bambu Lab recommends you download and print their Cable Protector 3MF file from Makerworld and attach it to your machine to ensure no damage occurs on the heat bed cable. Full Blog article from @BambuLab is linked below as well as a link to Makerworld. If your printer shows any abnormalities on the heat bed cable, reach out to Bambu Lab support using the provided support link in their blog post. Happy Printing

[DirkSlyther]

Your cable from the heat bed may not work well. It always gets kinked. You should be careful, especially on the A1. The cable should move freely.😮😮