filmov
tv
Vectric V12+ for the Absolute Beginner - Part 2 – Zoom, Toolbars, and the Profile Toolpath
Показать описание
Vectric V12+ for the Absolute Beginner - Part 2 – Zoom, Toolbars, and the Profile Toolpath
More down here ↓↓↓ Click MORE!
This is the second in a series of videos geared toward the person who has never worked with CAD or CAM software before. In this video, we’ll get into Zooming, some of the Toolbars, and the Profile toolpath, for the absolute beginner.
I’ll show you more navigation in the Vectric CAD/CAM software family, we’ll go through a few ways to zoom in and out of a file, and I’ll highlight some of the other toolbars in the 2D view. Then we’ll get into the Toolpath Tab, and I’ll demonstrate the Profile toolpath.
As usual, if you have any comments or questions, please put ‘em in the comment section below.
Thanks for watching!
On Sunday, August 4th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!
______________________________________________________________________________
If you’d like to support my channel and help with the making of future videos, please consider becoming a channel member. If you’d rather make a one-time donation, you can do that by using the following link:
Thank you very much!
______________________________________________________________________________
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
______________________________________________________________________________
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#Vectric #VCarvePro #Aspire
More down here ↓↓↓ Click MORE!
This is the second in a series of videos geared toward the person who has never worked with CAD or CAM software before. In this video, we’ll get into Zooming, some of the Toolbars, and the Profile toolpath, for the absolute beginner.
I’ll show you more navigation in the Vectric CAD/CAM software family, we’ll go through a few ways to zoom in and out of a file, and I’ll highlight some of the other toolbars in the 2D view. Then we’ll get into the Toolpath Tab, and I’ll demonstrate the Profile toolpath.
As usual, if you have any comments or questions, please put ‘em in the comment section below.
Thanks for watching!
On Sunday, August 4th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!
______________________________________________________________________________
If you’d like to support my channel and help with the making of future videos, please consider becoming a channel member. If you’d rather make a one-time donation, you can do that by using the following link:
Thank you very much!
______________________________________________________________________________
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
______________________________________________________________________________
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#Vectric #VCarvePro #Aspire
0:00:33
V12 COMING APRIL 2024 🎉 #shorts
1:31:17
Vectric V12 - Complete Review of New Features w/ Kyle Ely
0:21:33
How to create a simple sign in Vectric software | Getting Started | V12 Tutorials
0:15:44
This New Vectric Sketch Carving Tool Is AMAZING!
0:13:02
Introducing The Zero Plane - Part 33 - Vectric For Absolute Beginners
0:09:17
Introduction to two-sided machining in Vectric software | Two Sided Machining | V12 Tutorials
0:08:47
Vectric Aspire V12 MY OPINION + Suggestions and why I will no longer use the Aspire Part #2
0:08:23
How to create a rounded toolpath in Vectric software | Wrapped Rotary Machining | V12 Tutorials
1:45:10
The Most Complete Vectric 101 Tutorial for Beginners (Vcarve, Aspire, Cut2D), CNC Router Project
0:07:10
How to use the drilling toolpath in Vectric software | 2D Toolpaths | V12 Tutorials
0:18:15
How to use the profile toolpath in Vectric software | 2D Toolpaths | V12 Tutorials
0:17:43
How to use level effects, clipping and mirror mode in Vectric software | 3D Assembly | V12 Tutorials
0:06:24
How to node edit vectors in Vectric software | Editing Objects | V12 Tutorials
0:06:03
How To Carve Any Image On A CNC - Making The Vectric Toolpath Tutorial
1:19:03
What You Need To Know About Vectric Version 12
0:09:50
How to set-up your material in Vectric software | Toolpath FAQ's | V12 Tutorials
0:20:16
How to use the PhotoVCarve toolpath in Vectric software | 2.5D Toolpaths | V12 Tutorials
0:05:01
The GENIUS of adding MORE passes to Vcarve Pro toolpaths - Vectric
0:01:00
Threadmilling CNC Phone Lock Box | Vectric FREE CNC Projects #shorts
0:00:39
Timelapse of #PhotoVCarve with molding profile tool path around it
0:25:41
Vector Tracing in Aspire and VCarve v12 without the Curve tool!
0:04:04
Product Comparison Aspire, VCarve and Cut2D | Vectric CNC Software
1:27:40
Vectric 101 Tutorial For The Absolute Beginner [Vcarve, Aspire, Cut2D]
0:13:55
What's New Version 11.55 | Vectric CNC Software
Комментарии