Timber Frame - Tuning Up a Post and Beam Boring Machine from Old Sneelock's Workshop

preview_player
Показать описание
Much like the corn sheller, I have searched for a beam boring machine. Last week I found one that thankfully was in much better shape than the corn sheller was. A little oil and a couple of washers and it is good as new. It came with a 2" auger bit that needed sharpening and the pilot screw was very dull. In another video I'll explain how I tuned up the pilot screw on the bit.

-~-~~-~~~-~~-~-
Please watch: "BREAKING NEWS ~ Old Sneelock For President "
-~-~~-~~~-~~-~-
  1. The Real Old Sneelocks Workshop
  2. Timber Frame
  3. beam drill
  4. Beam Auger Machine
  5. drill press
  6. mortice and tenon
Рекомендации по теме
Timber Frame - 0:06:50

Timber Frame - Tuning Up a Post and Beam Boring Machine from Old Sneelock's Workshop

Timber Frame Barn, 0:17:18

Timber Frame Barn, One Step Higher - Setting Top Plates

Outdoor Kitchen Build 0:11:29

Outdoor Kitchen Build Part 2: Raising the timber frame walls.

Slicking a timber 0:01:01

Slicking a timber frame brace - super satisfying

Starting the First 0:08:31

Starting the First OAK TIMBER FRAME

Timber frame build 0:00:09

Timber frame build wall adjustment with the Husqvarna 572 XP 🪚

Sharpening timber frame 0:09:47

Sharpening timber frame chisels

S2 EP26 | 0:16:42

S2 EP26 | WOODWORK | TIMBER FRAME BASICS | MILLING PURLINS FOR THE POST AND BEAM ROOF OF THE CABIN

Building a House 0:20:53

Building a House from Trees SE 6 EP 6 Installing Windows in a Timber Frame

Building My First 0:21:51

Building My First Timber Frame! I Finally Did It!

Building A Timber 0:16:10

Building A Timber Framed Cabin - Part 3 - Off The Grid - Timber Framing

Strong Joint - 0:29:45

Strong Joint - Timber Frame Roof Truss II

Building a House 0:18:45

Building a House from Trees SE 7 EP 13 Homemade Timber Pegs and More Siding Work

Antique Timber Framing 0:13:12

Antique Timber Framing Tool Rebuild 2

MAKING OAK PEGS 0:10:50

MAKING OAK PEGS FOR THE DIY TIMBER FRAME - Not the Proper Way!

Making Timber Frame 0:21:50

Making Timber Frame Roof Braces Using Chain Mortiser

Among Us in 0:00:15

Among Us in HD (Part 47) TIMBER #Shorts

BUILDING AN OFF 0:30:25

BUILDING AN OFF GRID TIMBER FRAME WORKSHOP

I thought a 0:00:08

I thought a stud finder would prevent this...🤦‍♂️

Homestead Style Carport 0:11:05

Homestead Style Carport | Conventional Lumber/Timber Mix Build

Detached Bungalow to 0:23:35

Detached Bungalow to Detached House Renovation - BUILDING THE WALLS !! - TIMBER FRAME - STICK BUILD

Framing the ceiling 0:00:28

Framing the ceiling and roof! 2x6 pine boards. DIY Patio Build.

TIMBER FRAME JOINERY 0:16:58

TIMBER FRAME JOINERY -- on a rough cut beam with a twist

Building a Timber 0:21:06

Building a Timber Framed Barn PT3 Finishing Cutting and Raising!

Комментарии
Автор

Great find, I have one just like that. You have to love the old technology, unlike todays tools these actually work and will work for hundreds of years if cared for.

halfwayuphill
Автор

No problem. I'll work on that one for next week.

OldSneelock
Автор

Nice! I passed one of these up last summer and it was only 30.00 bucks...I'm kicking myself. Can you show it boaring a hole? I have never seen one working.

shagsgear
Автор

I seem to have an interest bordering on obsession. :-)

OldSneelock
Автор

There are a lot of Swan Drilling Machines around. They must be pretty rugged to have survived all these years.

OldSneelock
Автор

ok, but you dind't show yourself using it for its intended purpose at the end, which is why you're tuning it, no?

TenHanger