Test cutting acrylic CNC 3018 | speed and feedrate

Test cutting acrylic

#1fluteEndmills #cnc3018 #feedrate&speed

[hseegreen]

Hi nice material. Thanks... My question about spindle speed.. Do you use oryginal spindle? If so spec tels its 12000rpm but its not - its more around 7800-8000 rpm measured with tahometer. Did you measure you spindle speed with some device or just use max power of oryginal spindle?

[simarpannu]

Hey, when I try to engrave acrylic sheet. It doesn’t come out clean. Like the edges are rough and small but thread like acrylic coming out. What should I do? Thanks

[samsulmuhayadi]

Rekomendasi utk jenis endmillnya dong bang 😁
Terima kasih 🙏

[tentangsemesta]

endmill untuk cutting acrylic di 3018 pro standart apa bang

[deathblowhere]

Nice feed! 1000mm/min! Could you tell please, is this acrylic sheet cast or extruded ?? Thanks!

[oneal-alloveart]

TES UKIR HURUF TIMBUL, FEED RADE YG TEPAT DONG??

[flavianojose]

hey there, hope you are doing great, i have a 3018 cnc, and i bought now one flute from HQ Master, and still dont get the best settings to cut my acrylics, its always melting the acrylics, do you have better settings to recommend?

[KZura]

misi bang, untuk operasinya itu masih pake aplikasi bawaan ya ? atau ada aplikasi yang lain ?

[ariezkyrinaldy]

abang yg baik ikut nanya dong saya newbie nih.. tiap kali proses cutting akrilik misal tebal 3mm dengan settingan passed 6 putaran atau lebih, tiap kali dalam proses cutting nya suka rubah sendiri jalur endmill nya, misalnya putaran pertama dan kedua benar sesuai jalur nah putaran ke 3 dia rubah jalur. itu kenapa ya bang

[dengkoelkoepoeng]

Bang kok aku coba cutting akrilik pake endmill 2mm malah pada nempel di endmillnya itu bang, kenapa ya ?? 🙏🙏🙏 Apa krn spindel kurang cepat apa gimana ya, soalnya spindel punyaku 1000 rpm saya atur lebih dr itu tetep gak kenceng

[tentangsemesta]

bro sy udh beli.. ity pake spindle second ya.. nambah power supply brpa bro.

[hendhiek]

Bang, jika pengukiran sama pemotongan beda mata cuting, gmn?jika pengukiran selesai mau ganti mata apa kembali ke zero lagi apa lgsg

[leoriakbar]

kalau endmill nya 2 flute kayaknya lebih rapih ya om?

[gejultea]

Bang punya saya ko hasil'a kaya ke bakar ya bang ga halus kaya gitu, pata yg saya pakai sama, kenapa ya bang