BG10 checking for no suction causes

BG10 is not sucking up the water? Try this first!

[jenniferjangles]

Thank you! This video practically saved my business. I didn't have a drill or patience for undoing all the screws BUT putting the machine on its side, then cleaning it out with a butter knife worked. I just cleaned a carpet and it suctioned like new.

[alwaysright]

I WANT TO THANK YOU !! I have had My Bissell BG-10 since 2014, Has given me many years of cleaning. The suction stopped two days ago and I was about to toss it and get another. Lo and behold i got bored and found your I plucked out about a Half pound of Dog Hair from not only the front ( as you explained ) but eveywhere in the Roller, Behind the roller caked in so thick I needed to use a light high pressure water bath and a screw driver underneath. I suppose I was being very lazy as I never thought to clean under there. Furthermore, I had an additional I would shut off and store, there would be water, nasty water where it sat. I am assuming it was Water from all the clogged hair draining. After extensive thing does not leak and picks up the water like it was new. Thanks again so much !!

[Laura-zsys]

I used the little plastic drain cleaning stick it worked like a dream!

[kinneyj]

Bissell. Do you have any way of doing a video on replacing the vacuum motor? I replaced my carbon brushes on the motor and still it will not engage for the suction.

[harry_hands]

Informative video.👍 NOTHING WRONG WITH IT except, in my opinion: Why do so many people still take cell phone videos with their phones upright? Why not turn the phone 90 degrees so the aspect ratio is full screen? When I see videos taken like this I think "this video must have been taken by an 11 year old" and I catch myself thinking that quite often. I liked the information but I am floored by the aspect ratio decision. HOWEVER, THANK YOU for not adding background music to your upload like SO MANY wanna-be YouTubers do. For that you get a LIKE! 👍

[ingridlandinezlara]

HolA. Mi maquina aspira pero tengo q presionar la parte de adelante para q recoja bien el agua q seria lo q se le daño?

[ibartels]

I don't get suction out of the tube/brush attachment either - would this make any difference in that case?

[LTSRIDE]

Good information, but please, lay down a mat when working on the machine, especially a customers.

I was 🫣😬🫣😬 every time something was moved!

I would never lay a machine directly on cement & regardless of how careful you are, you're guaranteed to leave scratches.

[annettemills]

What could be the cause of my big green machine if it’s not spraying

[tinaanthis]

How do u get the nozzle gasket back on

[clarencenikel_]

Always check the upper housing if there is suction after dissembling the nozzle. After replacing the blown-out foot motor I had to replace the vacuum motor for no water suction.

[TheSonOfSammyTerry]

Maybe point the camera at something useful?

[lynnjaxful]

Why in the world would there be so many damn screws? This is not a user-friendly operation. I will never buy Bissell again. I have always had the competition but thought I would try Bissell. I bought 2 different models and they both are not user friendly. Horrible.