How to Replace Spark Plugs 2011-2019 Ford Fiesta

Buy Now!

Spark is one of the four required components for an internal combustion engine to run. If your spark plugs are failing, worn, or dirty, you may experience rough starts, rough idle, poor performance, or poor mileage. This video shows you how to install new spark plugs on your 2011-2019 Ford Fiesta.

This process should be similar on the following vehicles:
2011 Ford Fiesta
2012 Ford Fiesta
2013 Ford Fiesta
2014 Ford Fiesta
2015 Ford Fiesta
2016 Ford Fiesta
2017 Ford Fiesta
2018 Ford Fiesta
2019 Ford Fiesta

Tools you will need:
• 5/8 Inch Spark Plug Socket

Check out our playlist:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[TRQ]

√ Watch the Video
√ Do it Yourself
√ Save Money

[ms.m.]

THAT'S IT?! I CAN DO THAT
Thank you

[Miamiz]

I just replaced mine with Fords 525x Motorcraft and all 4 need it to be gaped to .32 they where way closer than that, i work at autoparts store and always tell my customers to double check since the same plug can be used for different applications with different gaps

[yzrahmazkorro]

Thank you so much!!!! This video is exactly what I needed right now👌🏻

[SebLikesCars]

Thanks helped me service my moms fiesta

[oden]

I changed the spark plugs on my 2012 ford fiesta. I noticed that the thread stops almost halfway for the 4 spark plugs, this is also the case for the old ones. These are all motorcraft parts. is that normal?

[SurviveUntilSunrise]

Wait. How do you know where to wrench the sparkplug so it’s down to 11 footpounds? Did you use some kind of socket wrench with a special sensor???

[kristoffscuba]

Didn’t look like that was torqued to 11 foot pounds when you hand two hands on the ratchet loosening it. 😂