Ultimate Workbench Upgrade: This Might Change Your Workshop!

Sedge is Spinning! This new tool in the Sedgetool shop has got him amazed at how much more efficient and productive he can be. What is this mysterious tool and how could it revolutionize your workshop? Watch now to find out!

I Hope This Helps !!
Be Positive & Stay Sharp .....WICKED Sharp !!!

#woodworking #workbench #shoptools

Links :

Affiliate for :

DISCLAIMER - As an Amazon Associate I earn from qualifying purchases.

Chris’s AV Gear:

Follow Us on the social media platforms :

————————
————————
————————
_ _ _ _ _ _ _ _ _

SedgeTool is all about woodworking and having a great time doing it. SedgeTool is Brian “Sedge” Sedgeley who brings 30 years of woodworking experience and tons of energy to the team. Chris "THE UNIT" Seibert who films it all! If you want to have a good time and learn something about woodworking, then you’ve come to the right place.

All views and opinions expressed during SedgeTool are explicitly those of SedgeTool. They are not intended to represent any claims, value statements, or opinions of any of the tools, brands, subsidiaries, or parent companies of brands referenced, visible, or mentioned on the show. The SedgeTool team is here for entertainment and educational purposes only. SedgeTool is not a replacement for proper training or safety guidelines as outlined by the manufacturer's owner’s manuals.

[MattLitkeRacing]

My favorite workshop upgrade was a beer fridge! 🍻

[coolbugfacts]

I have a few similar stops I 3d printed, they're not as nice but plastic won't nick your blade if you hit them which is a bonus. I've also tested my own 3d printed power-locs, I have to put a larger chamfer lip on them for strength, but they're surprisingly strong. I had to cantilever a board off the bench like a diving board and drop a 30lb kettlebell on it to break them

[warrensmith]

Oooh, I want two of those TSO Low profile "L" stops. They will be great for my cabinet LR32 jig setup. Thanks Sedge.

[BW-cwlq]

Professor Sedge, well done. This gives me something to think about. Blake

[RohitKulshreshtha]

I was on the fence about purchasing it. Gonna pull the trigger soon. Thanks!

[Mike--K]

I've used the jig that came with my Parf Guide kit as you did, but I had to drill the 3mm pilot holes first. The point on the 20mm cutter that came with my Parf Guide kit does not have a cutting edge and needs a pilot hole.

[Benmeglei]

I love Festool to death but my goodness that MFT3 is wobbly. Hopefully there’s a refresh in the horizon. Sedge, blink twice if there is. 😄👊🏻

[RealMcFruit]

Till now I thought our german "bohren" is "to drill" now I know you can "bore" a hole ^^ funny how different languages have same words. I made my own low profile stops from wood so I'm not afraid of ruining my planer

[cerberus]

Is the MFT/3 amazon link an affiliate link, if so I'll use it for my MFT/3 purchase.