How to diagnose ford anti theft codes.(No scanner.)

preview_player
Показать описание
Hello viewers.Today I have a quick trick on how to diagnose why your ford anti theft system is not working properly.If your not sure the theft system is the reason why your vehicle won’t start I recommend checking out my previous video where I go into more detail on how to tell if the theft system is why your vehicle won’t start.Keep in mind there are many different anti theft codes.I recommend looking up your specific code.I hope this helped and thanks for watching.
Рекомендации по теме
Комментарии
Автор

If you don't have time to sit there and watch the light flash for nothing, skip to 1:25.

CCoburn
Автор

so Im sitting here watching the flashing red light?

dixieboy
Автор

Mine lights up after a minute every 4 seconds

twenty-
Автор

I have a 94 explorer with the antitheft light blinking it cranks but wont start. it just started doing it out of the blue its a great low mile rig but its useless now

mattjennings
Автор

My car's a2001 myself light came on it just shut off so ain't nothing connected

TammyGooden
Автор

My 2006 F150 Triton has this issue with Pats intermittently. Had new key made ($255) programmed (even reprogrammed even a couple of times) but still intermittent, code 1333. Both original key and new key do the same Replaced fuse which looked corroded no help. Could it be transponder, PCM? Even thinking bad ground somewhere? Starter replaced recently, battery, altenator all good. Thanks for any suggestions... desperate.

zsigzsag
Автор

My Nissan Frontier blinks but when I lock the door it stops blinking but is still showing a red car. And cranks up. My truck is shot and if it locks me out again, I'm going to fill it full of lead. They say you Can't kill a Nissan. That's why they run a long time. 👀

Justin-fqvj
Автор

Do you have a link to a place to find the codes? My escape blinks 1 time followed by 4 blinks and can't find the code list anywhere

ballzac
Автор

I have a 2003 crown Vic. I pulled the anti theft fuse and now can’t start the car. I don’t even notice any blinking codes from the light near the fuses

TysonD