Rough Idle Poor Hesitation Stalls Surging, Solved

preview_player
Показать описание
Please click thumbs up. Subscribe. Click on my name for more how-to videos,,,,Enjoy!!!
Рекомендации по теме
Комментарии
Автор

I have watched a couple of your videos now and the best part that I like about them!!!! Is that you get straight to the point I hate watching videos that make you watch 10 minutes of information about ads and people wanting you like it subscribe and everybody sponsoring him supporting them I love your videos because you get to the point, ,, great videos and I'll keep watching

joshhaupt
Автор

Thanks for the suggestion, I picked up my 2002 tarus for 600 bucks, Drives like a champ but sounds like a diesel when im idling

datboi
Автор

Not my top of the list car but I see a lot of older Tauruses still going

bennygreene
Автор

Watched your video and others found the vacuum line on the fire wall side of the plenum had loosened
acted just like a misfire or a broken valve spring. Used very long pinchnose plyers put it on the fitting ..

markdohm
Автор

Hi Thomas, did the idle improve after you replaced the broken valve spring? Thanks.

dobrinbossev
Автор

#4 is the exhaust valve? Did I hear you correctly? I have a '92 Taurus SHO, and the idle is rough. I am starting to think that it's normal, but I can't help but wonder. The EGR-271 was changed. A new feedback sensor installation recently, and the idle is rough the same.

chris
Автор

Thanks, great video! I have a Ford Freestar. Running very rough, Gave error codes po174 and po2196. I changed all 02 sensors and reset ECU, I also changed spark plugs&wires, EGR, MAF, fuel filter and cleaned PCV valve, Car still runs rough and throws the code po2196 even after reset??? At wits end!! Very frustration. Have a 2004 Ford Freestar 4.2

wchillhowell
Автор

I’m looking at a 06 I’m diesel mechanic I’m going but what they dealer that has it told me #3 internal misfire I’m going look at it fired any idea

anitahoover
Автор

Damn. I need friends like you. My 2005 Mercury Mariner is starting to act up and I have no idea what it is. Possibly this same problem. I hope it’s not cuz I can’t fix it myself. I can fix a Chevy but I don’t know Fords. Lol!!

littlemonster
Автор

Can you please let me know what do I have to do when one of the pushrod goes in the engine

pbrdzwd
Автор

My 2005 Taurus is only surging while going uphill about 30 miles per hour. Always up the hill so that the mysterious part.
Only uphill

bennygreene
Автор

Is surging different from a sticking throttle cable?

bennygreene
Автор

I remember mine i got one on the otherside not so lucky got more extra work but eventually i get over it coz its too much of taking out the other stuff. But i got it fix. Better than a broken or bent piston rings or rod.😂😂😂😂😂

mervintresreyes
Автор

does this usually happen on the same cylinder every time? I hear this is pretty common and mine is doing this... I really don't wanna pull the stupid intake manifold

DaBossk
Автор

Hello. I have a problem with my Taurus 2002 DOHC Duratec 24v 3.0L, the engine have some kind of grinding or screeching sound near the water pump. Always, no matter hot or cold. Very loud, from the inside sounds like my muffler fell down on the ground and Im pulling it..Do you have any idea what could it be? Thank you

kpexzlz
Автор

Does it have a misfire code when it does this?

nickolasedmunds
Автор

Ford Taurus 1999 SE Dual overhead cam three Pollo has the same problems and it’s a 1999

rickeywallace
Автор

My 2007 Ford taurusus running sluggish when I accelerate

terrytherien
Автор

That happened to my Ford Taurus this summer it’s currently 120, 006 miles

anthonyatkins
Автор

Can someone please point me in the right direction.. my car is running really rough and stalls while driving

jacobjohnson
visit shbcf.ru