Making Non Ethanol gasoline

preview_player
Показать описание
we have all tried to start a small engine after it sitting for months only to find out the carb is all gunked up and it wont run..
Modern Gasoline has CORN ALCOHOL added to it and this "ethanol" will absorb water.. then it will sink to the bottom of your gas tank or float bowl and create havoc. I have watched a lot of videos but none of them really covered the easy process to do it..
Рекомендации по теме
Комментарии
Автор

Use 20% water, some fuel may contain as much as 15% ethanol. Let sit for minimum 24hrs to ensure suspended water molecules have settled out

ben
Автор

A little Marvel Mystery in the Oil (MMO) in the gas negates the ethanol and gives extra power via oil. Lubricates the top end while running also. Here in Florida with the heat and humidity its a must.

brucer
Автор

its absolutely necessary to remove this garbage from your fuel
its corrosive in most engines, , I`ve just had to drain my tank on
the motorbike as it just will not start or run on E10, as soon as I put
the separated petrol back in it fired up and runs a treat, no octane booster !
tho I will try it with as well to see the difference, , great video thankyou !

MegaTubescreamer
Автор

Ok the food coloring thing is great. With some videos its hard to see a difference. Im not sure if 10 minutes to an hour will be enough time 2:39, 3:11. Some suggest 24-48hrs to fully settle or separate.

sayitaintso
Автор

Thanks. Due to corn subsidies the destructive ethanol gas is cheaper than ethanol free. I'll be doing this for my small engine gas

lunarrn
Автор

In UK we have E10 ( 95 octane standard fuel) or E5 ( super 99 ocatane fel) So how does more ethanol make for a better fuel?

jimsmith
Автор

Where did you get the 5 gallon container with that nozzle? Are they both safe for use with gasoline? Thanks!

ooglek
Автор

So how about distilling the the water and use the ethanol as a stand alone yard torch fuel?

robertpronovost
Автор

So what does a person do with the ethanol/water that is removed?

brianedwards
Автор

You should get 0.45gl ethanol from 4.5gl of (10%)gas, not 0.5gl

ManNomad
Автор

What do you do with the water and ethanol removed?

westonlee
Автор

The question is what is the octane after separation so you know how much booster to add?

totalyep
Автор

You did what my chemistry instructor termed, "...And an excess of dihydrogen oxide added to the gasoline ethanol mixture...". Or something like that...

leventy
Автор

In our town, a local fuel distributor sells ethanol free 91 octane at their warehouse. The local Walmart gas station has a separate pump which sells ethanol free 87 octane. I usually get the 91, cuz my motorsickle likes that better. Just saying, it doesn't hurt to call around to different distributors to see if they offer "corn free, " fuels.

jdsolberg
Автор

add a couple of drops of two stroke oil to the fuel instead of food coloring . helps the engine and the carb.

MrCountrycuz
Автор

Is there a use for the water ethonal mix?

spikemcnock
Автор

you said in the video you live in New Hampshire, i do too so why not just buy non ethanol gas at the gas station yes, it costs a little but much easier than doing all that work? Then what do you do with the ethanol/water mix you removed from the gas?

robertlarose
Автор

How much octane did you loose. You had to lose

michaelkozak
Автор

I'm sure someone must have said this but your numbers where off in the 1st jug. 1/2 gallon is not 10% of 4.5 gallons and 1 gallon of water/10% ethanol of 4.5 gallons. You should have had FIVE/5 GALLONS OF FUEL then a 1/2 gallon of water for a total liquid amount of 5.5 gallons then you would or should have ended up with 4.5 gallons clean fuel and 1 gallon of 1/2 water 1/2 ethanol. If your still doing this you should look into a 2 or 3 gallon glass separatory funnel it makes it so easy so

eddiekytia
Автор

Two problems. With the container with the spigot, draining would obviously be a problem because the bottle needs to be vented but the vent on this bottle is on the top which is the bottom when the bottle is inverted. Apparently, the spigot allowed enough air in to replace the drained fluid. The other problem is that you mentioned that you flipped the container over. But when you do that, you have to let the gas settle out again so why did you have it right-side up in the first place. The problem is that you have to find a way to prop the container up while it settles. You didn't mention that.

bmfilmnut