Connect CPVC to Copper Pipe - CPVC Fittings

preview_player
Показать описание
An easy way to connect cpvc to copper pipe is using push fit fittings. The pipe is just pushed into the fitting and the pipe locks in place. The fittings also come with a tool to remove the pipe if there needs to be an adjustment.
Рекомендации по теме
Комментарии
Автор

With any shark-bite style push fitting it's SUPER IMPORTANT to properly prepare the pipe. When these fittings fail it's almost always due to poor installation that damages the rubber "o-ring" inside the fitting. You need to 1) deburr the inside and outside edge of the pipe opening and 2) make sure the fitting is completely locked into place. Sharkbite makes a great deburring/measuring tool combo that fits all pipe sizes (it's orange and looks like a pan flute).

elmic
Автор

That was a great straight to the point explanations, exactly what I needed to know. Thanks

RobertSCarlton
Автор

Perfect explanation for someone like me... I have some mechanical knowledge but i'm no plumber!!! THANK YOU... You just saved me $50-$100 on hiring a

patrickhuff
Автор

this is what i needed thank you ! keep it up

operationhotshotinc.
Автор

Thankz, we do all our own work so big help!!!

jazzyg
Автор

I have used a shark bite once in my home plumbing, and it has remained water tight for about 8 years now. I still have only used the one, and probably won't go back and just use copper or cpvc in the future despite the success.

KingdomeBleachers
Автор

Exactly what I need to connect my water heater pressure relief valve CPVC drain pipe to copper drain pipe. How do I remove the fitting if I have too, any special tools? Do I have to clean or sand copper pipe before connecting?

jamescc
Автор

Are the push on fittings trustworthy in terms of how long they last?

na
Автор

thank you, i can finally change my reverse osmosis saddle valve to this. i should be able to buy all these at home depot, correct?

Kendkend
Автор

Great video, can you connect PVC pipe to copper the same way? Also can I use the sharkbite outdoors exposed (not underground) with no issues? Thanks in advanced

lakersbaby
Автор

What about the inserts on the pvc pipe you should mention that

mikecat
Автор

how many years dioes the oring last? db

harmonicsl
Автор

*Not a good idea when access to the sharkbite isn't accessible..they have failed*

starrtile
Автор

push fittings do not last when used out doors.

richardb
Автор

what is the failure rate on this type of connection?  considering cpvc, but worried about long term.

Автор

I've had two of these blow out. Put them in a wall and you're screwed, sooner or later.

johnranalletta