I BOUGHT A BURNT 2018 FORD F-250!

What's going on guys in todays video we bought a 2018 ford F-250!

----------------------------------------------------------------------

[bobspatafore]

I love that you all are smiling and having fun during the process

[ronaldmoparornocar]

Might want to think about burying the power cable from the pole to the building so you don't catch it again or if you have an employee at some point when you get big enough and get your self a waste oil oil, trans fluid, brake fluid, power steering fluid, diesel, ect on things you have to have records of recycling/disposal is antifreeze and battery acid/ old dead batteries worked in the salvage/parts industry for 20+ years tires absolutely suck but it's part of the game best thing to do is not allow them to pile up I don't know what the cost is per tire now but last I knew was$1.25 per have a covered area to store them so they don't fill with water and we would stack batteries on a pallet and when we got 40-50 we would bring them to the scrap metal place and sell them we were getting $5.00 a battery back then I don't know what it is now.there is money to be made with it... just look at LKQ... and all your buddies that are rebuilding vehicles should be using recycled parts instead of dealership parts..I mean somethings you have to buy new but it's a miniscule amount....oh and maybe get with your local scrap guy and see if they would put a couple 10-15 yard dumpsters in your for brake rotors and drums that's #1 prepared and one for core engines.... and old radiators knock the plastic tanks off and get them flat and stack them on pallets also.... just some knowledge sharing for you....or you can tell me to go shit in my

[muskokamike]

Congrats on the forklift, you SO needed 1.

You can make all kinds of attachments to mount on the forks to haul, pull, or push vehicles around. When you lift from below you run the risk of damaging the undercarriage. I had a shop in a storage building and they had a piece that mounted on the front for moving around boats on trailers (ball).

They also make great mobile frame racks. Press the forks against the frame and use the other end to pull. (you've already done this).

They are great for removing truck beds too. Build a frame out of 2 x 4's that slip under the bed rail and up she comes.

[toafy]

Ben, you could strip the melted parts off the engine check it turns by hand then take heater plugs out, connect the starter motor too a battery pack and do a compression test on the engine, just an idea. I have used burnt motors before and been lucky, and i always do that test before refitting an engine wether its had a rebuild or just replacement and never fails. Just an idea but worth a go to know condition of that engine

[emmanuelnjibaloh]

Man you got lucky with the power line. Just me more vigilant when moving that heavy equipment

[MLAD]

Hello Veniamin, lovely work. I enjoy watching you, you're like grandson.

The Forklift has Daewoo written all over it. Not Doosan, this was made before Doosan brought Daewoo heavy industries. Should be a solid forklift for many more years. Good, Veniamin.

[shcaskey]

"save the engine" ?! you're a glass half-full kind of guy!!😁

[stuartfact]

That motor seems pretty far gone, but I love your enthusiasm!!!

[bwhaggis]

Love the different content from building a car to tearing one down for parts awesome love it

[zzxpyw]

Check out a turbo max nozzle that attaches to your pressure washer wand. It delivers a much stronger spray!

[tylerward]

Used to work alot on these type of forklifts. It's pronounced Daywoo. Cheers!

[johnf]

Wouldn’t be a vTuned video without the usual SamCrac paper weight making an appearance.

[ericpinkney]

You need to aquire a set of extra long forks for the doosan. Thanks for the great content! Cheers from Edmonton, Alberta, Canada

[bozidarkilibarda]

Yesterday had so many uploads that I almost missed this beauty

[peterseitz]

Hi Ben, very interesting content. I'm happy to see the hard-working Jack with you again. Keep it up and good luck with your new business.

[taurota]

Awesome as always.Thanks for sharing and taking us along

[RobToGame]

Drill a hole in one of the forks big enough for a hitch ball and you can move anything that has a trailor hitch. You can also make some fork extensions out of rectangular tubing pretty easy so you dont puncture anything on the bottoms of your cars when you lift them.

[luisalbino]

Saludos desde 🇵🇷.Yo empecé a ver el canal por el Ford Mustang y todavía sigo esperando la continuación y conclusión del Mustang .No le vi sentido en parar ese proyecto.

[michaelhawkins]

Looks like the transmission may be salvageable?

[husseinhaddadi]

Will support you with whatever you post as you are a legend