Betaflight OSD Not Showing? EASY FIX!

Basically, there are two buttons called "Display & OSD". I've found that both of them have to be on in order to see the text inside your Fatshark goggles. Hope this helps! Like and Subscribe! Leave a comment below if you found this to be helpful.

╔════| FPV Drone Gear╞═══════════════════════╡
╚═════════════════════════════════════════════════╡

╔════| Drone Repair Equipment╞═══════════════════════╡
╚════════════════════════════════════════════╡

╔════| Beginner Drone Gear╞═════════╡
╚══════════════════════════════════╡

*above are affiliate links back to Amazon & GetFPV.
*Maverick Aerial Photography LLC is a Licensed & Insured Drone Pilot.

╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
╠╗║╚╝║║╠╗║╚╣║║║║║═╣ I couldn't fly FPV without YOU!
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●

[markus.thalassia]

Thank you!!! Straight to the point – clear and concise... and it solved my trouble :)

[glytch]

I changed my font to bold... and now my OSD is permanently gone... how the hell do I get it back? This didn't do anything. I'm freaking so pissed. Brand new quad... just wanted to make the font bold.

[miket]

This guy is a g thank you so much for making these videos kept me from pulling my hair out keep making videos brother there helping people.

[thereal-stl_slim]

Thank you for saving me 2 hours! God bless brother

[HorizonFPV]

Every time I "save and reboot" it disables the "display" switch. No osd. Running F7 fc.

[greedfox]

that is a really dumb way for that setting to be labeled... no wonder I couldn't figure it out. >:/

edit: the display button is fighting me, I turn it on and then save, it goes back.

[stefdav]

Thanks Man.. saved me where I was goin crazy!! 🤛🏾🤛🏾🤛🏾🤛🏾

[tracypippenger]

Aha the magic video thanks it was driving me crazy easy fix

[pizaafro]

hey i wanted to make the display mode on... I saved and reboot but the display mode have turned off automatically!! You Know any solutions?

[carlosrFPV]

If you are here for problems with OSD. did you flash your FC with the right OSD protocol?
be careful with that.

[KKTHXFPV]

thanks man, i was having the no osd problem, watched other videos but what you posted was what got it working for me

[Alpha]

wow holy crap, that was the problem! Super easy fix...10 seconds! Liked and subscribed.

[El_Muffy]

My quad is not showing osd, is it all caused by betaflight, or maybe a wire not soldered to the vtx? Do u have osd just with the 3 cam wires linked to the vtx?

[Ricko]

Thank you for the video - I also discovered that ya won't have an OSD if the port for the on board OSD is not configured!

[lemo_fpv]

ty for your tip. In my settings it was activated. Just switch to off and then on did it for me

[casadioDesign]

Thank you so much! I had this issue combined with PAL selection!

[ogpennywise]

If you switch to NTSC it will show you what your camera shows. If you are in NTSC mode. I don't live in PAL countries, anymore, so I don't use PAL as it is larger and a different freq.

[setau]

yess thank you so much, running betaflight 4.3 and this solved it

[keitharoo]

This fixed it!!! Thank you, thank you thank you!!!!

[loupiez]

I have everything on that you do and there's still nothing coming up along with all the drone pictures on betaflight, nothing is coming up. I have a Flysky FS-i6X controller connected to the Eachine wizard X220S
any help would be greatly appreciated!