HOW TO RETAIN A BACKUP CAMERA ON A 2014 TOYOTA CAMRY, HOW TO ADD AXXESS AX-TOYCAM3-6V INTERFACE

I try to explain how to add the Axxess AX-TOYCAM3-6V interface to retain factory back up camera to a aftermarket screen. this was on a 2014 toyota camry

[jaydenculley]

Thank you so much, had to watch a few times but now my backup camera works!!

[Kevn_DJ]

Oh man. I told my Fiancé I could do this.😅 thanks to you I think I can pull it off. Thank you

[scottmasters]

Thank you! I’ve got the ax-toycam2-6v for my 2011 Avalon. The instructions are very inadequate. The way you connected it is the only thing that made sense. That you for confirming it.

[Kwo]

Great Video! saved me time with these confusing wires, also if you end up having a ground reading (0.00) and you have the car in reverse check the (BACUP LP) (7.5) fuse under the drivers side, I swapped that and bam! Back up cam. I have a 2014 Camry SE 2.5

[jeremylessenberry]

You are a life saver! Up and running with new stereo and stock backup cam.

[mohannewsfeed]

Thank you boss, I have Toyota Camry 2014 .I install after market radio.i retain my factory back up camara by this video.its working now.thank you so much.

[flipmode]

Thank you sir for your simple to follow step by step instructions. I used the backup adapter on my new Teyes CC3 android radio on 2017 Toyota Highlander and bam works like a charm!

[lampinlance]

Thank you so much for taking the time to explain the steps! Great video.

[leoxrock]

Great explanation, I upgraded it my 2010 Prius with an aftermarket stereo but wanted to keep the OEM backup camera and got stuck finding the Reverse signal from the car harness. I bought the same module to retain the backup camera. I will try your method, hopefully I will be able to find it. Thanks

[teofilsandru]

Great video on my toyota misuring the camera wires i have 7v in this case i need tu put the convertor or where i should connect the reverse wire? Thanks

[xMylox]

Can you put a link to the harness you bought?

[heinzotto]

So in this case only one of the module’s connectors is plugged into the factory harness? The other end is just left dangling? (Does not go into radio?)

[allengreenberg]

Great video got my 2016 rav4 XLE factory camera to work with a pioneer DEH-x4500bt.thanks

[Max]

Nice! You explain it so beautifully. This information help me a lot, Thanks a lot for making this video 👏👏👏👍❤

[JoseAlvarez-ofwz]

I had installed an aftermarket radio before making the attempt to retain my factory backup camera. I tapped into a reverse wire from the fuse box, so I need to have the regulator and the radio to the same reverse trigger in order to work? Or can I leave the radio tapped into the fuse box and the regular where you had it in this video?

[Kevn_DJ]

I am also working on a 2014 Camry. Does the stereo reverse wire and the black/white wire connection need to be separate? Or can they go into the same slide connector then I onto the t tap?

[desmondthang]

im also trying to retain my prius 2017 fatory camera into my android headset. Install the 12 to 6v step down but im getting a distorted image. Have you seen this issue before?

[andrescortes]

Thank you so much for the tutorial. It worked out almost perfect. Although the camera is working It won't automatically switch to the camera unless I hit the camera button on the control panel when the car is in reverse. Any idea what I might have done wrong?

[ericksilva]

Great video, I just purchased that same harness and step module you think I could cut off all the extra wires or just pull the pins out of the connector side I dont need ive connected sound systems many times I just never messed with factory retainers always have done full aftermarket

[JFWoodshop]

Please help me cus its my first time ever trying to hook up an after market stereo in a car. When you talk about the reverse camera wire, How do i splice in 2 wires into the 1? Is there a special quick splice connector that i need? One that joins 3 seperate wires?