2014 Toyota Camry Oil Change

2012 - 2017 Toyota Camry 2.5L Oil Change

Tools Needed:
- Socket Wrench
- Breaker Bar
- 5 QTs 0W-20
- Oil Filter

[bkzach]

Thank you for making this, short and simple and easy to follow. Changed my oil for the first time ever by myself with this video as a guide lol.

[oneundecided]

Thank you for the video, may I ask you what is the oil change interval on 2.5 liter Toyota engine? I was told by the Toyota sales agent that it is six month or 8000 km, but the internet suggests 10000 miles or one year for the synthetic oil 0W-20.

[oscarserrano]

What tool do I need to take out the oil filter?

[michaelramirez]

thank you for the tutorail was very helpful for me yesterday

[pukeschannel]

The filter element you removed does not look like the one you installed.

[kileykoppit]

what if i don’t have the tool to remove the filter . like my oil NEEDS CHANGED so i can’t wait for one to come in

[krrodriguez]

Nice video thank you is the same oil when the car have more than 100, 000 miles

[video]

A half art actually does make a difference

[TheSirkao]

My fikter looks different.. when i remove the screw on bottom thats all it come out the screw... not the entire thing

[davidcampbell]

If you use the filter drain tool that comes with the oil filter you don't make as much of a mess on your driveway or cardboard. I put a plastic house on my drain tool(about 1 ft) that reaches the oil pan, and I just keep using it, it makes the job less messy! (The Toyota cartridge filter systems are a real shitty design, they finally figure that out and went back to a canister filter.) Other then that is was a great video.

[njsongwriter]

No, it's not alright.
Don't overfill with oil.
The add oil mark on the dip-stick also represents the minimum safe level of oil. Anything below that is excessively low. The upper mark on the dip-stick represents the full mark or the maximum safe level. Anything above that is excessive or over-full. If it didn't matter then why even put a full mark on the dip-stick?
Better to be a half quart below full than a half quart above full.

And how is it that you bought an oil filter box that is for an oil filter that doesn't fit your Camry but that contained a different brand filter that does fit your Camry?

[newwavepressure]

Hows the car holdin up they run forever

[boomer]

Did you even notice that there's a 3/8" piece right on the filter housing? You don't even need the removal tool, just a 3/8" extension. You can see it clearly at 3:34.

Also put your o ring on before you put the filter in 🤦

[TheRainHarvester]

What size gasket do I purchase? Thanks!

[stevensevek]

So, not even any mention of draining the filter...!
Or proper torque specs?

The tool you linked to (Motivx MX2320) is the right tool but the one you are using is the wrong tool. If you check yours, the teeth on the wrench do not fully engage onto the tabs on the oil filter cap. The one you are using is for the 1.8 liter Corolla engine. The reason it is working at all is because the upper fluted part of all Toyota oil filter caps for cartridge systems is the same size (14 glutes/xxmm).

Following torque specs will help prevent the oil filter cap from being stuck. (18 ft.lbs.)

[dillindellechiaie]

Did anyone notice it was a different filter he put in then the original?

[lovemykids]

I believe you should fill the new filter with oil before you install it. Right?

[dannykalpakchi]

Hello, Do you have description of the housing filter tool?

[alanballard]

I know this is an old video, but he did that wrong on the oil filter, you suppose to remove the bottom plug to let the oil drain out the filter housing Before you remove the oil filter housing. HE TRY.

[monkeypolice]

Good job man 👍just went to a Mexican auto shop the stupid mechanic didn't know how to take out the filter can't even jack my car right. Please Please becareful people don't take to a mechanic you don't know. Do it urself or find a mechanic you can trust.