I try the Banggood 7 mm CCMT boring bar in my Sherline micro lathe

Показать описание

Will it fit ? Will it chatter ? Is it any good ? Watch and see.

Camera: Nikon L820

Рекомендации по теме

Комментарии

Hey Rob, Great to see the old Sherline out :), would be interesting how those cheap carbide tips look under your USB microscope after a bit of a workout. Great video as always!!

MadAussieMatt

G'day Rob. I think you are having more fun with that Sherline than the law allows. Keep on.

AmateurRedneckWorkshop

I visited a watch maker and discovered there are very small quick change tool post sizes below AXA and AX0. Height adjustment, super easy. ;-)

CraftedChannel

You could use a drill bit in the chuck and bore a hole in your tool holder, , the size of your boring bar. That hole would be centered exactly in the on your chuck. No shims or washers.

dougrundell

There are a couple of things on that old Sherline that I prefer to the modern ones. On the new ones the c/s is made of aluminum, and if you tighten the screws more than finger tight when you mount a accessory that uses both T-groves (like the compound slide or a vice for milling) the c/s will warp and bind. By having it in cast iron like I think yours is, and using English style T slots across the c/s, that should be less of an issue. Have you noticed any problems?

Also the tailstock on the new models have a grub screw to hold the tail stock barrel in position. I prefer the slot and screw arrangement I see on yours, it will hold the barrel in central position better than a grub screw. Stefan Gotteswinter showed his Chinese lathe once where he had changed the barrel clamping action to this pinching method.

CandidZulu

I've never seen a Blue Sherline before! Mine is black. Is that an earlier model?

gwheyduke

Hey, Bobby. Do you know where I can get drive belts for a unimat 3000? I’m using o-rings and they slip a lot. Great video. Thanks for sharing.

bulletproofpepper

Hi Rob, can you give me details of the 'rolling metal' shop review as I am thinking about getting a set of these. Kindest regards. Joe.

RGSABloke

I try the Banggood 7 mm CCMT boring bar in my Sherline micro lathe

I try the Banggood 7 mm CCMT boring bar in my Sherline micro lathe

Very Affordable router lift I used for 8 months, China Tools 36

China tools: Workbench Accessories on a BUDGET!

7 in 1 Router Jig / M.POWER CRB7 MK3 Router Base Review

How bad is a $95 3D Printer??

Vocaease A.I. Translation Ring 'ALMOST PERFECT?!'

#321 7 Sensors tested: Measuring Current with Microcontrollers (Arduino, ESP32, ESP8266)

[318] Banggood 12 Piece Pick Set and Transparent Padlock Review

Are these CHEAP rail guide SQUARES any good?

Fimi Mini v3 | Finally some DJI competition

China Tools Ep. 30 Parallel guide system Insane low price!

Fake Makita Impact Better? Let's find out! Makita XWT11Z 18V LXT Lithium-Ion Brushless Cordles...

How to Use the Lishi 2-in-1 Lock Pick

#268 8 Wire Stripper Test: Germany vs. China. Who wins?

[349] Banggood/HUK 3-Piece Tubular Lock Impressioning Tool Set Review

Mobula 7 HD 3s 'CineWhoop' - the best I've tried - but not perfect

My Favorite Table Saw Upgrade EVER!

Router fence and Spiral bits, China Tools Ep.31

Milwaukee 1/2-Drive Socket to 1/4-Hex Quick Change Adaptor - Shockwave

China Tools, Amazing Doweling jig you have to see!

[356] Banggood Lock Pick/Snap Gun Review

Perfect dust extractor for the average workshop!

Καρυπίδης: Πώς ΚΑΤΑΧΡΕΩΘΗΚΕ ο Νεαρός Εκατομμυριούχος

Affordable and easy to build accurate workbench router table