How To Pair and Reset Your Sennheiser HD 4.40 Headphones to Your Bluetooth Device

How to pair your Sennheiser HD 4.40 BT wireless headphones to your Bluetooth Device.

Easy Steps to Set up Bluetooth Device with Headphones:
1. Power on headphones by holding down the first vertical button (Power Button) on the right ear cup for 3 secs, until you hear an audible voice say "power on," the small LED indicator will also blink a blue light.

2. To pair your headphones with your bluetooth device hold down the same Power Button for 5 secs, until you see the LED light flash blue and red. Click on the bluetooth settings on your device and look for the headphone device name "HD 4.40BT" and click on it. Once you choose the device you will hear an audible voice say "connected."

NOTE: Once your bluetooth device has been paired with your headphones you can skip step one and

Easy Steps to Reset Your Heaphones' Bluetooth Profiles:
1. To clear all paired devices from your headphone, set the headphones to pairing mode.
2. Once the blue and red lights blink, simultaneously press the multifunction button and the power button for 4 seconds. The LED flashes purple 3 times and the headphones will reset and be disconnected from all bluetooth devices.

[suetaylor]

Just to prove that your video is still useful 6 years after making! Thank you👍

[KatotownUSA]

Thank you so much. I bought some $200 headphones and went through 2 Bluetooth transmitters before I realized I wasn’t putting them into pairing mode. You’re more helpful than the manual that came with them.

[kingseye]

This was driving me crazy. I was blaming my Samsung Smart TV. Then I went to YouTube, as usual. Saw this 1:41 video. Also noticed that many others were not realizing how to get the Headphones into Pairing Mode. I kept turning the headphones on and off. Key: Once you hear "Power On, " hold down the on/off button for Five Seconds, then you will see the reddish/purple light blink. Put the headphones within 8 inches of the modem or device, and immediately you see HD 4.40 on your device. Much appreciated, BrandsWalk. Bravo!!

[ChaseMountains]

i literally have to watch this video every time my phone decides to forget my headphones lol

[Kugelbkitz]

This comment show's how useful your video is even in this days... Thnx:⁠, ⁠-⁠)

[Chaotic_Monk]

I got a pair of these a few years ago and completely forgot you had to do this, so when I got a new phone I was so confused and was on the verge of buying new headphones since it doesn't have an audio jack, thank you!

[itzflame]

Tysm! my headphones were saying “Bluetooth pairing” and I couldn’t connect to it, but once I found this video, it’s a lot easier now! this deserves a like :)

[cobraflunkie]

Dude, you have saved me so much time. This video is invaluable. I almost returned these because I couldn't figure out how to pair them properly. Many thanks.

[planetearth]

Fantastic video. I spent hours browsing websites how to get these headphones to pair with my PC. I even bought a bluetooth adapter as I thought my internal one was faulty. I thought my drivers could be out of date too, but they were fine. This video showed me that all I needed to do was hold the power button down for 5 seconds until the lights flashed intermittent blue and red. Then VIOLA, my headphones were paired and connected. Thanks so much for helping me. These YouTube videos are way better at finding a fix than any web site forum.

[chrysanthemum]

THANK YOU! I’ve had these headphones for 2 weeks and never got past charging them. Printed instructions are just impossible for me to follow - this is helpful! 😁

[larryhill]

Thank you for this video. It simplified the process immensely for me. I am somewhat tech savvy, but Sennheiser's instructions on pairing needs considerable improvement.

[fransvandaele]

Thank you so much. Tried everything in the book, updating drivers etc etc, nothing worked. Until I stumbled upon this video. 5 seconds and the thing worked !

[fairuzbintealam]

Thanks so much for the trick. I was trying to put it onto pairing mode, but everytime I held the power button for more than 4 seconds it was turning off instead of going to pairing mode. Your trick where you said to hold down the power button, even after it is turned on, did the trick for me, which even the Sennheiser manual couldnt solve for me. Very grateful for this!!

[heatherwhaley]

Why didn't I look you up sooner?! My son's $200 headphones have been sitting for a year because we couldn't pair them with anything! Thank you!!!

[ConorMG]

Thanks dude! It’s so much easier to follow a video than the guides they have

[lucycoleman]

Thank you for such a straightforward video...i had the same problem as others with them turning off when i tried to hold the button down again but continuing to hold it down when you turn the headphones on worked like a charm.

[abhishekmishra]

You are the best person in the history of humanity, I spent about a month figuring how to connect but at the end it was you who helped in my problem

[SJ-xrwk]

Thank you so much!!! I've tried so many times to pair the headphone with my computer but failed! It was soooo frustrating!! After watching your video, i realized the secret is to hold the button while the pairing device is searching for the phone-- it finally worked!! (the searching process is only a few seconds and the timing is so tricky!!!) now i can enjoy this expensive headphone!! Thank you thank you thank you!!

[JuanDMUSIC]

Thank you bro...for a few seconds I thought that the blueethoth of the headphones was damaged, but I just saw your video and now I am happy again! Thank you

[SundayMourningLove]

Thank you! I got my headphones set up in a matter of seconds thanks to you! (I wasn't holding the power button down long enough, lol)